597388

Liebherr CBNPes 3967 PremiumPlus Manual

8
Zoom out
Zoom in
Previous page
1/26
Next page
u
Remove the faceplate
Fig. 5 (1)
.
u
Using a screwdriver, disengage
the cover
Fig. 6 (6)
on the hinge
side and draw it outwards for
removal.
Fig. 6
u
Unscrew the soft stop unit (2x Torx® 15)
Fig. 5 (7)
.
u
Pull the soft stop unit out a little, push it in the direction of the
handle side and swing it out.
u
Set the soft stop unit aside.
u
Unscrew the bearing
element
Fig. 7 (8)
, turn it
180° and transfer it to the
opposite side. Possibly
make preliminary holes with
a bradawl or use a cordless
screwdriver.
Fig. 7
4.3.2 Releasing the cable connection on the
housing
Fig. 8
u
Open the upper door, if necessary.
For appliances without soft stop mechanism:
u
To remove the cover on the
handle side
Fig. 9 (6)
: disen-
gage using a screwdriver on
the right and slide outwards.
u
To remove the cover on the
hinge side
Fig. 9 (11)
: disen-
gage using a screwdriver on
the left and slide outwards.
Fig. 9
For all appliances:
u
Remove the front panel
Fig. 8 (10)
using a flat-blade screw-
driver.
u
Take out the contact and disconnect the plug connection
Fig. 8 (12)
.
u
Detach grey cable
Fig. 8 (13)
from the guide.
4.3.3 Detaching the upper door
Note
u
Remove any food from the door racks before removing the
door, so that no food falls out.
Fig. 10
u
Draw the cover
Fig. 10 (20)
forwards and lift it off.
u
Lift off the cover
Fig. 10 (21)
.
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Completely undo the screws
Fig. 10 (22)
.
u
Lift off the door complete with turn hinge
Fig. 10 (23)
and
cable. For release, possibly use a flat-blade screwdriver and
carefully lever it under the turn hinge.
u
Set the door aside.
4.3.4 Detaching the lower soft stop mecha-
nism*
For appliances with soft stop mechanism.
For appliances without soft stop mechanism proceed with
item (see 4.3.5) .
Fig. 11
u
Open the lower door.
NOTICE
Risk of damage!
If the door seal is damaged, the door may fail to close properly
and the cooling will be inadequate.
u
Do not damage the door seal with the screwdriver!
u
Disengage and remove the faceplate
Fig. 11 (30)
using a
flat-blade screwdriver.
w
The faceplate is attached over the soft stop bracket.
Putting into operation
8 * Depending on model and options
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNPes 3967 PremiumPlus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNPes 3967 PremiumPlus in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNPes 3967 PremiumPlus

Liebherr CBNPes 3967 PremiumPlus User Manual - German - 26 pages

Liebherr CBNPes 3967 PremiumPlus User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info