715295
20
Zoom out
Zoom in
Previous page
1/36
Next page
4.6 Connecting the appliance
WARNING
Failure to connect properly
Fire hazard.
uDo not use an extension cable.
uDo not use distributor blocks.
NOTICE
Failure to connect properly
Damage to the electronics.
uDo not connect the appliance to a stand-alone inverter,
e.g. solar power systems and petrol generators.
uDo not use an energy saving plug.
Note
Only use the power connection lead supplied.
uA longer power connection lead can be ordered from
Customer Service.
Fig. 51
For 600 mm wide appliances:*
a* b* c* d* G*
~ 1800 mm ~ 1400 mm ~ 2100 mm ~ 200 mm Appliance
plugs
For 700 mm wide appliances:*
a* b* c* d* G*
~ 1750 mm ~ 1350 mm ~ 2100 mm ~ 200 mm Appliance
plugs
Ensure that the following conditions are met:
-The type of current and voltage at the installation
site correspond to the information on the model plate
(see 1 Appliance at a glance) .
-The socket is earthed according to the regulations and
fused.
- The fuse tripping current is between 10 and 16 A.
- The socket is easily accessible.
-The socket is outside the back of the appliance area in
the specified area Fig. 51 (a, b, c).
uCheck the electrical connection.
uInsert the appliance plug Fig. 51 (G) into the back of the
appliance. Ensure that it clicks into place.
uConnect the power plug to the power supply.
wThe Liebherr logo appears on the screen.
wThe display switches to the standby symbol.
4.7 Switching on the appliance
Note
If the appliance is in demo mode, DEMO appears on the
homescreen.
uDisable demo mode (see 7 Malfunctions) .
Note
The manufacturer recommends:
uStore frozen produce at -18 °C or colder.
Connect and switch on appliance approx. 10 hours before
loading it for the first time.
4.7.1 Switch on appliance
If the standby symbol is displayed over the whole screen:
uPress the standby symbol.
wThe appliance is switched on. The display switches to the
home screen.
wThe appliance is set to the displayed temperatures. This
is shown by down arrows.
If the standby symbol is displayed in the fridge compart‐
ment field, the BioFresh compartment field and the freezer
compartment field:
uPress the Standby symbol in the freezer compartment
field or the fridge compartment field.
wThe appliance is switched on.
wThe appliance is set to the displayed temperatures. This
is shown by down arrows.
If the screen is black:
uTouch the screen.
wThe standby symbol appears on the whole screen.
uPress the standby symbol.
wThe appliance is switched on. The display switches to the
home screen.
wThe appliance is set to the displayed temperatures. This
is shown by down arrows.
4.7.2 Switching the fridge and BioFresh
compartments on
If the standby symbol is displayed in the fridge compart
ment and the BioFresh compartment fields
uPress the standby symbol in the fridge compartment
field.
wThe fridge and BioFresh compartments are switched on.
wThe fridge and BioFresh compartments are set to the
displayed temperature. This is shown by down arrows.
4.8 SmartDevice box
SmartDevice box: Start-up instruc‐
tionswww.smartdevice.liebherr.com/install
If the SmartDevice box (SDB) is inserted correctly the menu
below appears. The device is supplied with WLAN activated.
To use more WiFi options,
open the WIFI menu.
Fig. 52
uPress WIFI.
wThe WIFI menu opens.
Turning on/off WiFi
Fig. 53
uUse the slider at the bottom right to turn on/off WIFI
Putting into operation
20 * Depending on model and options
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNes 5778 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNes 5778 in the language / languages: English as an attachment in your email.

The manual is 2.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNes 5778

Liebherr CBNes 5778 User Manual - German - 38 pages

Liebherr CBNes 5778 User Manual - Dutch - 38 pages

Liebherr CBNes 5778 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info