715295
8
Zoom out
Zoom in
Previous page
1/36
Next page
NOTICE
Risk of damage from stainless steel care products!
The stainless steel doors and stainless steel side panels
are treated with a premium surface finish.
Stainless steel care products attack these surfaces.
uOnly use a soft, clean cloth to wipe down finished door
and side panel surfaces and painted door and side panel
surfaces. To remove heavy dirt, use a little water or
neutral detergent. Alternatively, you can use a micro-fibre
cloth.
uRemove the protective film from the decorative trims and
drawer fronts.
uRemove all transit supports.
Spacers must be used to achieve the declared energy
consumption and to prevent condensation in the event of
high surrounding humidity. This increases the appliance
depth by about 15 mm. The appliance will work perfectly
well without the spacers but will have a slightly higher
energy consumption.
uIf your appliance comes with
wall spacers, mount these on
the back of the appliance,
bottom left and right.
uDispose of packaging material (see 4.5 Disposing of
packaging) .
CAUTION
Risk of injury or damage from the appliance tipping or the
door falling open!
If the additional adjustable foot on the base support is not
correctly positioned on the floor, there is a risk of the door
falling open or the appliance tipping. This can lead to injury
or property damage.
uUnscrew the additional adjustable foot on the support
until it reaches the floor.
uThen turn it another 90°.
uAlign the appliance so that it
stands firmly and on a level
by applying the accompa‐
nying spanner to the adjust
able-height feet (A) and
using a spirit level.
uThen support the door:
Extend the adjustable foot
at the turn hinge (B) until it
rests on the floor and then
make a further 90° turn.
Note
uClean the appliance (see 6.4 Cleaning the appliance) .
If the appliance is installed in a very damp environment,
condensate may form on the outside of the appliance.
uAlways see to good ventilation at the installation site.
4.3 Reversing the door
If necessary, you can change the way the door opens:
Ensure that the following tools are available:
qTorx® 25 (T25)
qTorx® 15 (T15)
qSlotted screwdriver
qOpen-ended wrench SW10
qSpirit level
qOpen-ended wrench supplied with the T25 tool
qIf necessary, a cordless screwdriver
qGet a stepladder if necessary
qIf necessary, a second person for assembly
4.3.1 Remove the upper soft stop mechanism*
Fig. 10
uOpen the top door.
NOTICE
Risk of damage!
If the door seal is damaged, the door may fail to close prop‐
erly and the cooling will be inadequate.
uDo not damage the door seal with the screwdriver!
uRemove the outer cover. Fig. 10 (1)
uDisengage and release the bearing bracket cover.
Remove the bearing bracket cover. Fig. 10 (2)
uUnlatch the panel with a slotted screwdriver and swivel it
to one side. Fig. 10 (3)
Fig. 11
Putting into operation
8 * Depending on model and options
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNes 5778 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNes 5778 in the language / languages: English as an attachment in your email.

The manual is 2.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNes 5778

Liebherr CBNes 5778 User Manual - German - 38 pages

Liebherr CBNes 5778 User Manual - Dutch - 38 pages

Liebherr CBNes 5778 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info