70345

Liebherr CBNES 5067 Manual

9
Zoom out
Zoom in
Previous page
1/26
Next page
Fig. 12
u
Slide the faceplate forwards over the soft stop bracket
Fig. 12 (34)
in the direction of the appliance.
u
Snap the safety lock
Fig. 12 (32)
into the oblong hole.
w
The safety lock prevents the hinge from snap-closing.
u
Using a screwdriver, lift off the cover
Fig. 12 (31)
from the
outside and remove it in an outward direction.
u
If necessary, tip the appliance backwards with the assis-
tance of a second person.
u
Press the pin
Fig. 12 (33)
out from underneath.
u
Press the soft stop bracket
Fig. 12 (34)
towards the door.
u
Remove the faceplate
Fig. 12 (30)
.
u
Unscrew the soft stop unit (2x Torx® 15)
Fig. 12 (35)
.
u
Pull the soft stop unit out a little, push it in the direction of the
handle side and swing it out.
u
Set the soft stop unit aside.
4.3.5 Detaching the lower door
u
Close the lower door.
For appliances without soft stop mechanism:
u
Draw the middle bearing pin
Fig. 13 (41)
out of the turn
hinge and lower door.
For appliances with soft stop mechanism:
u
Draw the middle bearing pin
Fig. 13 (41)
together with the
washer
Fig. 13 (44)
out of the turn hinge and lower door.
For all appliances:
u
Remove the plastic cap
Fig. 13 (40)
.
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Open the lower door.
u
Unscrew the middle turn hinge (2x Torx® 25).
Fig. 13 (42)
u
Lift off the lower door and set it aside.
4.3.6 Transferring the middle bearing elements
Fig. 13
u
Carefully detach the cover panel
Fig. 13 (43)
.
u
Turn the middle turn hinge
Fig. 13 (42)
with thewasher
Fig. 13 (45)
through 180° and screw it firmly into place on
the new hinge side (with 4 Nm).
u
Turn the cover panel
Fig. 13 (43)
through 180° and snap it
into place again on the new handle side.
4.3.7 Transferring the lower bearing elements*
for appliances without soft stop mechanism
Fig. 14
u
Lift out the bearing pin
Fig. 14 (52)
together with washer
Fig. 14 (53)
and adjustable-height foot
Fig. 14 (54)
.
u
Lift off the stopper
Fig. 14 (51)
.
u
Unscrew
Fig. 14 (56)
the turn hinge
Fig. 14 (55)
.
u
Unscrew
Fig. 14 (59)
the bearing element
Fig. 14 (58)
,
transfer it to the opposite location hole of the turn hinge and
screw it firmly into place.
u
Carefully lift off the cover on the handle side
Fig. 14 (57)
and
transfer it to the opposite side.
u
Screw the turn hinge
Fig. 14 (55)
firmly into place on the
new hinge side, possibly using a cordless screwdriver (with
4 Nm).
u
Re-insert the stopper
Fig. 14 (51)
into the other hole.
u
Re-insert the bearing pin
Fig. 14 (52)
together with the
washer and adjustable-height foot. In so doing, pay attention
that the locating lug points backwards
4.3.8 Transferring the lower bearing elements *
for appliances with soft stop mechanism
Fig. 15
u
Lift out the bearing pin
Fig. 15 (52)
together with washer
Fig. 15 (45)
and adjustable-height foot
Fig. 15 (54)
.
u
Lift out the stopper
Fig. 15 (51)
.
Putting into operation
* Depending on model and options 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNES 5067 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNES 5067 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNES 5067

Liebherr CBNES 5067 User Manual - German - 26 pages

Liebherr CBNES 5067 User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info