Manual Liebherr cbnes 5067 422l (page 13 of 26) (English)

348146

Zoom out

Zoom in

1/26

When installing with kitchen units (max. depth 580 mm), the

appliance can be positioned directly next to the kitchen cabinet

Fig. 26 (3)

. The appliance will project by 34 mm

at the sides

and 50 mm

in the centre of the appliance in relation to the

kitchen cabinet front.

Ventilation requirements:

At the back of the stack cabinet there has to be a ventilation

duct of at least 50 mm depth throughout the width of the

stack cabinet.

The ventilation space under the ceiling has to be at least

300 cm

the larger the ventilation space, the more energy-saving the

appliance is in operation.

If the appliance is installed with the hinges next to a wall

Fig. 26 (4)

, the distance between appliance and wall has to be

at least 40 mm. This corresponds to the projection of the

handle when the door is open.

4.6 Disposing of packaging

WARNING

Danger of suffocation due to packing material and plastic film!

Do not allow children to play with packing material.

The packaging is made of recyclable materials:

corrugated board/cardboard

expanded polystyrene parts

polythene bags and sheets

polypropylene straps

nailed wooden frame with polyethylene panel*

Take the packaging material to an official collecting point.

4.7 Connecting the appliance

NOTICE

Risk of damage to the electronic control system!

Do not use stand-alone inverters (conversion of d.c. to a.c./

three-phase) or energy saving plugs.

WARNING

Fire and overheating hazard!

Do not use extension cables or multiple socket outlets.

Current type (alternating current) and voltage at the installation

site must be in conformity with the data on the type plate situ-

ated inside the appliance, on the left.

The socket must be properly earthed and fused. The

tripping current for the fuse must be between 10 A

and 16 A.

It must be easily accessible so that the appliance can

be quickly disconnected from the supply in an emer-

gency. It must be outside the area of the rear of the

appliance.

Plug in the power plug.

When the language selection is

indicated in the display:

To select the language: Move the

cursor down using the Down

button

Fig. 3 (7)

, move the cursor

up using the Up button

Fig. 3 (6)

Confirm with the OK button

Fig. 3 (3)

4.8 Switching on the appliance

4.8.1 Switching on the refrigerator compart-

ment

The appliance is supplied in the

switched-off state.

If you want to switch on the entire

appliance, you only have to switch

on the refrigerator compartment.

The freezer compartment is auto-

matically switched on as well.

Switch on the appliance approx. 2 hours before adding frozen

food for the first time.

Do not add frozen food until the temperature display indicates

-18 °C.

Activate the MAIN MENU.

Activate the REFRIGERATOR menu

Set the cursor to ON/OFF.

Press OK button

Fig. 3 (3)

The ON/OFF menu is displayed.

Press OK button

Fig. 3 (3)

The current cooling temperature is displayed in the tempera-

ture display refrigerator compartment

Fig. 3 (1)

. The preset

temperature is indicated above.

The temperature display freezer compartment flashes until

the temperature is cold enough. If the temperature is above

0 °C, dashes flash. If it is below, the current temperature

flashes. The preset temperature is indicated underneath.

Putting into operation

* Depending on model and options 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr cbnes 5067 422l in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr cbnes 5067 422l

Liebherr cbnes 5067 422l User Manual - German - 26 pages

Liebherr cbnes 5067 422l User Manual - Dutch - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Liebherr cbnes 5067 422l Manual

Product: