715294

Liebherr CBNes 4898 Manual

32
Zoom out
Zoom in
Previous page
1/36
Next page
Defect Cause Remedy
WARNING
Risk of injury from LED bulb!
The light intensity of the LED light corresponds to hazard
group RG 2.
If the cover is defective:
uDo not look directly into the light from close range. It
cause injury to the eyes.
The door seal is
defective or needs
to be replaced for
another reason.
→The door seal can be replaced. It
can be replaced without the need
for special tools.
uContact Customer Service (see 6 Maintenance) :
The unit has iced
up or condensation
has formed.
→The door seal may have also
slipped out of its groove.
uCheck to ensure that the door seal is seated properly in
the groove.
8 Messages
Error messages and reminders are displayed by an
audible signal and a message on the screen. The
audible signal gets louder and louder when error
messages appear. It only stops when the message
is confirmed. Highest priority messages are displayed
first if several occur at the same time. Each message
must be cleared separately.
The message stays in the menu field as long as it is active
or the fault is not eliminated.
Note
Details on the message can be displayed again via the menu
field.
uPress menu.
uPress the message symbol.
uThe display switches to the next message when you
press one. After the last active message the display
switches to the home screen.
Door alarm
An audible warning sounds if the door is open for
longer than 60 seconds. The door alarm symbol
appears on the display. The audible warning stops
automatically when the door is closed.
The audible warning can be switched off when the
door is open. The audible alarm is switched off
while the door is open.
uPress the door alarm symbol.
wThe door alarm stops.
wThe display switches to the home screen.
uClose the door.
Temperature alarm
An audible signal sounds if the temperature is
not cold enough. The temperature alarm symbol
appears on the display.
The temperature had risen too high during the last
few hours or days. When the fault is eliminated the
appliance continues to work at the last temperature
setting.
The reason for too high a temperature may be:
-hot, fresh food was inserted
-too much warm room air flowed in when rearranging and
removing food
-the power was cut off for a while
-the appliance is faulty
uOpen the door.
uPress the temperature alarm symbol.
wThe audible signal stops. The warmest temperature
reached during the malfunction is displayed on the
screen.
uPress the screen or wait for 30 seconds.
wThe display switches to the home screen. Arrows and the
temperature alarm symbol appear in the relevant temper‐
ature field . In addition the messages symbol is
displayed in the menu field .
uCheck the food for quality. Do not consume spoiled food.
Do not re-freeze defrosted food,
uClose the door.
wThe symbols are greyed out when the target temperature
is reached.
If the alarm status persists or the temperature cannot be
reset independently:
(see 7 Malfunctions) .
Power cut
An audible warning sounds. The power cut symbol
appears on the display.
The temperature had risen too high over the last
few hours or days due to a power cut or power
interruption. When the power is restored the appli‐
ance continues to work at the last temperature
setting. Activated reminders are retained.
uOpen the door.
uPress the power cut symbol.
wThe audible signal stops. The warmest temperature
reached in the freezer compartment during the power cut
is displayed on the screen.
uPress the screen or wait for 30 seconds.
wThe display switches to the home screen. Arrows and the
symbol temperature alarm appear in the relevant temper‐
ature field . The messages symbol is also shown in
the menu field .
uCheck the food for quality. Do not consume spoiled food.
Do not re-freeze defrosted food,
uClose the door.
wThe symbols are greyed out when the target temperature
is reached.
Messages
32 * Depending on model and options
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNes 4898 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNes 4898 in the language / languages: English as an attachment in your email.

The manual is 2.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNes 4898

Liebherr CBNes 4898 User Manual - English - 36 pages

Liebherr CBNes 4898 User Manual - German - 40 pages

Liebherr CBNes 4898 User Manual - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info