715293
26
Zoom out
Zoom in
Previous page
1/28
Next page
Temperature alarm
An audible signal sounds if the temperature is not cold
enough. The temperature alarm symbol appears on
the display.
The temperature had risen too high during the last few
hours or days. When the fault is eliminated the appli-
ance continues to work at the last temperature setting.
The reason for too high a temperature may be:
-hot, fresh food was inserted
-too much warm room air flowed in when rearranging and
removing food
-the power was cut off for a while
-the appliance is faulty
uOpen the door.
uPress the temperature alarm symbol.
wThe audible signal stops. The warmest temperature reached
during the malfunction is displayed on the screen.
uPress the screen or wait for 30 seconds.
wThe display switches to the home screen. Arrows and the
temperature alarm symbol appear in the relevant temper-
ature field . In addition the messages symbol is
displayed in the menu field .
uCheck the food for quality. Do not consume spoiled food. Do
not re-freeze defrosted food,
uClose the door.
wThe symbols are greyed out when the target temperature is
reached.
If the alarm status persists or the temperature cannot be reset
independently:
(see 7 Malfunctions) .
Power cut
An audible warning sounds. The power cut symbol
appears on the display.
The temperature had risen too high over the last
few hours or days due to a power cut or power inter-
ruption. When the power is restored the appliance
continues to work at the last temperature setting. Acti-
vated reminders are retained.
uOpen the door.
uPress the power cut symbol.
wThe audible signal stops. The warmest temperature reached
in the freezer compartment during the power cut is displayed
on the screen.
uPress the screen or wait for 30 seconds.
wThe display switches to the home screen. Arrows and the
symbol temperature alarm appear in the relevant tempera-
ture field . The messages symbol is also shown in the
menu field .
uCheck the food for quality. Do not consume spoiled food. Do
not re-freeze defrosted food,
uClose the door.
wThe symbols are greyed out when the target temperature is
reached.
Appliance faults
An audible warning sounds. The appliance fault
symbol appears on the display with the relevant error
code.
An appliance component indicates a fault.
uOpen the door.
uNote down the fault code.
uPress the appliance fault symbol.
wThe audible signal stops. The display switches to the home
screen.
uClose the door.
uContact Customer Services (see 6 Maintenance) .
If the fault related to a specific temperature zone, the appliance
fault symbol is displayed instead of the temperature in the
zone's temperature field.
Other messages
FreshAirChange filter (see 6 Maintenance)
Clean the ventilation grille (see 6 Mainte-
nance)
9 Decommissioning
9.1 Switching the appliance off
Note
If the appliance or the freezer or fridge compartment cannot be
switched off the child safety device has been switched on.
uSwitch the child safety device off (see 5.2.2 Switching the
child safety device off) .
9.1.1 Switch off the appliance from the menu
The whole appliance is switched off. The screen goes black.
uPress menu.
uPress the navigation arrows until the standby symbol
is displayed.
uPress OK.
wThe standby symbol flashes on the whole screen. The whole
appliance is switched off.
wAfter 10 minutes the standby symbol goes out.
9.1.2 Switching the appliance off via the
freezer compartment field.
The fridge and BioFresh compartments are automatically
turned off when the freezer compartment is turned off. The
screen remains on.
uPress the freezer compartment field.
uPress plus.
wThe plus symbol is greyed out if it is pressed again after
selecting the hottest temperature. The standby symbol is
displayed on the screen.
uPress OK.
wThe standby symbol is displayed in all temperature fields.
wThe freezer, fridge and BioFresh compartments are
switched off.
9.1.3 Switching off the fridge and BioFresh
compartments
If necessary, the fridge and BioFresh compartments can be
switched off separately.
uPress the fridge compartment field.
uPress plus.
wThe plus symbol is greyed out if it is pressed again after
selecting the hottest temperature. The standby symbol is
displayed on the screen.
uPress OK.
wThe standby symbol is displayed on the fridge compartment
and BioFresh compartment fields.
wThe fridge and BioFresh compartments are switched off.
9.2 Taking the appliance out of service
uEmpty the appliance.
uSwitch off the appliance (see 9 Decommissioning) .
Decommissioning
26 * Depending on model and options
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNef 5735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNef 5735 in the language / languages: English as an attachment in your email.

The manual is 3.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNef 5735

Liebherr CBNef 5735 User Manual - German - 28 pages

Liebherr CBNef 5735 User Manual - Dutch - 5 pages

Liebherr CBNef 5735 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info