802976
14
Zoom out
Zoom in
Previous page
1/26
Next page
-Avoid unintentional switching off of the appliance.
-Avoid unintentional temperature adjustments.
Activating/deactivating settings
uActivating/deactivating (see 6.2 Operating
logic) .
Info
This setting allows the appliance information to be read out
as well as access to the customer menu.
It provides the following information:
-Model name
-Index
-Serial number
-Service number
View appliance data
uPress the navigation arrows Fig. 5 (1) repeatedly until the
settings are displayed.
uPress Confirm Fig. 5 (2).
uPress the navigation arrows Fig. 5 (1) repeatedly until the
information display appears.
uRead the appliance data.
Reminder
Reminders are displayed acoustically by a beep and visually
by a symbol in the display. The signal gets louder until the
alert stops.
Replace the FreshAir active carbon filter
This message appears when the air filter needs replacing.
uReplace the air filter every six months.
uConfirm the message with OK.
wThe service interval resets.
wThe air filter guarantees the air quality in the fridge.
Activate setting
uActivating/deactivating (see 6.2 Operating logic) .
Reset
This function resets all settings to the factory settings. All
settings that you have made thus far will be reset to their
original values.
Activate the setting
uActivating (see 6.2 Operating logic) .
6.4 Error messages
Error messages appear in the display. There are two catego‐
ries of error message:
Category Meaning
Message Reminder of general procedures. You can carry
out these procedures to eliminate the message.
Category Meaning
Warning Appears when there are malfunctions. A signal
sounds in addition to the display. The signal
becomes louder until you acknowledge by
tapping the display. You can eliminate simple
defects yourself. For more serious defects, you
must contact customer service.
6.4.1 Warnings
Close the door
This message appears if the door is open too long.
You can set the time before this message appears .
uStop alarm: Confirm the message.
-or-
uClose the door.
Power failure.
This message appears if the freezer temperature rises after
a power outage. When the power outage is over, the appli‐
ance will continue to operate at the last temperature
setting.
uStop alarm: Confirm the message.
wTemperature alarm appears (see Temperature alarm) .
Temperature alarm
This message appears if the freezer temperature does not
match the set temperature.
Temperature differences may be caused by:
-Hot fresh food was placed in the appliance.
-When sorting and removing food from the appliance, too
much warm ambient air got in.
-There has been a prolonged power outage.
-The appliance is faulty.
When the cause is eliminated, the appliance will continue to
operate at the last temperature setting.
uConfirm the display.
wWarmest temperature is displayed.
uConfirm the display again.
wThe status display is displayed.
wCurrent temperature is displayed.
Error
This message appears when there is a fault with the appli‐
ance. An appliance component has an error.
uOpen the door.
uTake note of the error code.
uConfirm the message.
wThe signal tone stops.
wThe status display appears.
uClose the door.
uContact customer service. (see 9.4 Customer service)
6.4.2 DemoMode
If “D” appears in the display, demo mode is on. This feature
is designed for retailers. The cooling features are disabled.
Switching off DemoMode
When you see a time counting down:
uConfirm within the countdown.
wDemoMode is off.
If there is no countdown:
uDisconnect the power plug.
Use
14 * Depending on model and options
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNd 5223 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNd 5223 in the language / languages: English as an attachment in your email.

The manual is 6.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNd 5223

Liebherr CBNd 5223 User Manual - German - 26 pages

Liebherr CBNd 5223 User Manual - Dutch - 26 pages

Liebherr CBNd 5223 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info