802974
17
Zoom out
Zoom in
Previous page
1/36
Next page
Activating/deactivating settings
uActivating/deactivating (see 6.2 Oper
ating logic) .
Language
This setting lets you choose the language of the display.
Choose from the following languages:
-German
-English
-French
-Spanish
-Italian
-Dutch
-Czech
-Polish
-Portuguese
-Russian
-Chinese
Activating/deactivating settings
uActivating/deactivating (see 6.2 Operating logic) .
Info
This setting allows the appliance information to be read out
as well as access to the customer menu.
It provides the following information:
-Model name
-Index
-Serial number
-Service number
View appliance data
uSwipe in the display until Settings appears.
uConfirm the display.
uSwipe in the display until About appears.
uRead the appliance data.
Reminder
Reminders are displayed acoustically by a beep and visually
by a symbol in the display. The signal gets louder until the
alert stops.
Replace water filter*
This message appears when the water filter needs
replacing.
uReplace the water filter every 6 months.
uConfirm the message with OK.
wThe service interval resets.
wThe water filter guarantees the best water quality.
Replace the FreshAir active carbon filter
This message appears when the air filter needs replacing.
uReplace the air filter every six months.
uConfirm the message with OK.
wThe service interval resets.
wThe air filter guarantees the air quality in the fridge.
Activate setting
uActivating/deactivating (see 6.2 Operating logic) .
Reset
This function resets all settings to the factory settings. All
settings that you have made thus far will be reset to their
original values.
Activate the setting
uActivating (see 6.2 Operating logic) .
6.4 Error messages
Error messages appear in the display. There are two catego‐
ries of error message:
Category Meaning
Message Reminder of general procedures. You can carry
out these procedures to eliminate the message.
Warning Appears when there are malfunctions. A signal
sounds in addition to the display. The signal
becomes louder until you acknowledge by
tapping the display. You can eliminate simple
defects yourself. For more serious defects, you
must contact customer service.
6.4.1 Warnings
Close the door
This message appears if the door is open too long.
You can set the time before this message appears .
uStop alarm: Confirm the message.
-or-
uClose the door.
Power failure.
This message appears if the freezer temperature rises after
a power outage. When the power outage is over, the appli‐
ance will continue to operate at the last temperature
setting.
uStop alarm: Confirm the message.
wTemperature alarm appears (see Temperature alarm) .
Temperature alarm
This message appears if the freezer temperature does not
match the set temperature.
Temperature differences may be caused by:
-Hot fresh food was placed in the appliance.
-When sorting and removing food from the appliance, too
much warm ambient air got in.
-There has been a prolonged power outage.
-The appliance is faulty.
When the cause is eliminated, the appliance will continue to
operate at the last temperature setting.
uConfirm the display.
wWarmest temperature is displayed.
uConfirm the display again.
wThe status display is displayed.
wCurrent temperature is displayed.
Use
* Depending on model and options 17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNbsd 576i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNbsd 576i in the language / languages: English as an attachment in your email.

The manual is 7.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNbsd 576i

Liebherr CBNbsd 576i User Manual - German - 36 pages

Liebherr CBNbsd 576i User Manual - Dutch - 36 pages

Liebherr CBNbsd 576i User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info