For AM(MW)
reception,connect the loop
antenna (aerial) to the ter-
minal marked AM
(Supplied)- OPTIONAL
FM wire
antenna
(supplied
)
TV Connection
Video connection
Connect the VIDEO OUT jack from the
unit
to the
VIDEO IN jack on the TV using the video cable supplied
(V).
T
T
ip
ip
• Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
Caution
•
Make sure the unit is connected directly to the TV.
Select the correct AV input on your TV.
• Do not connect your
unit
to TV via your VCR. The
DVD image could be distorted by the copy protection
system.
Antenna (Aerial) Connection
Connect the supplied FM/AM(optional) antennas to lis-
ten to the radio.
• Connect the AM loop antenna to the AM antenna con-
nector. (optional)
• Connect the FM wire antenna to the FM antenna
connector.
Note :
Note :
• To prevent noise pickup, keep the AM loop(optional)
antenna away from the unit and other component.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
Speaker System Connection
Connect the speaker wires to the speaker terminals.
Note :
Note :
• Be sure to match the speaker wires to the appropriate
terminal on the components, + to + and – to –. If the
cables are reversed, the sound will be distorted and
will lack bass.
• If you use front speakers with low maximum input rat-
ing, adjust the volume carefully to avoid excessive
output on the speakers.
OPTIONAL