19
ow to use washer
H
1. Normal
2. Rinse
+
& Medic Rinse
3. Rinse Hold
Rinse
• By pressing the Rinse button, the Rinse
type can be selected.
- Normal
- Rinse
+
- Medic Rinse
- Normal+Hold
- Rinse
+
+Hold
• Cotton (for full load), Synthetic, Allergy Care,
Cotton Quick, Baby Care performs 3 Rinses
• Cotton (for part load), Delicate, Hand
Wash/Wool, Quick 30 performs 2 Rinses.
• Used to additional rinse, which may assist
in removing traces of detergent residue.
• By selecting Rinse
+
or Medic Rinse
function, the Rinse Time and the Rinse
water are increased.
• Medic Rinse heats the water to 40 Deg in
the last rinse.
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed to a Drain or Spin function after
a Rinse hold, press the Spin button for the
desired speed, then press the Start/Pause
button.
The matching indicator lamp will light up for
identification.
Child lock
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and
holding the Option and Rinse button
simultaneously.
(About three seconds)
• To deactivate Child lock system, press
and hold the
Option
and Rinse button
simultaneously again.
(About three seconds)
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both
Option
and Rinse
button to cancel the child lock.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it
can be deactivated only by using child-lock
cancel process. Turning the power off and
operational errors will not affect child-lock.
