Manual LG WD-1250ARD (page 9 of 36) (English)

619596

Zoom out

Zoom in

1/36

nstallation



Normal Tap without thread & screw type inlet hose



Normal Tap without thread & one touch type inlet hose

1. Unscrew the fixing screw to

attach the tap.

2. Push the connector up till the

rubber packing is in tight contact

with the tap. Then tighten the 4

screws.

3. Push the water supply hose

vertically upwards so that the

rubber packing within in the

hose can adhere completely to

the tap and then tighten it by

screwing it to the right.

1. Un tighten the upper connector

screw.

2. Push the upper connector up till

the rubber packing is in tight

contact with the tap. Then

tighten the 4 screws.

3. Connect the water supply hose

to the middle connector,

pushing the plate down.

• Your machine comes with only

cold water connection.

• Make sure that there are no

kinks in the hose and that it is

not crushed.

• Make sure that the rubber seal

is inside the hose connector.

• In case the diameter of the tap is

large remove the guide plate.

• Turn the middle connector not

to have water leaked.

• To separate the water supply

hose from the middle connector

shut off the tap. Then pull the

inlet hose down, pushing the

plate down.

Rubber

packing

Rubber

packing

Rubber packing

Middle

connector

Middle

connector

Hose connector

Rubber seal

Rubber packing

Upper

Connector

Upper

Connector

Upper Connector

Upper

Connector

Upper

Connector

Plate

Guide Plate

Water supply hose

Water supply

hose

Upper Connector

Fixing screw

Horizontal tap

Extension tap

Square tap

Used the horizontal tap

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of LG WD-1250ARD in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

LG WD-1250ARD Manual

Product: