618833

LG VR94070 NCAQ Manual

14
Zoom out
Zoom in
Previous page
1/76
Next page
14
How to use Robosense™ function
Instructions d'utilisation Fonction Robosense™
Robosense™ function can measure distance between the
user and vacuum cleaner. After the measurement, vacuum
cleaner will move automatically to keep a constant distance
(about 1.0m) between the user and the vacuum cleaner. When
distance between transmitting sensor in the grip handle and
receiver sensors on the vacuum cleaner becomes more than
1m, Vacuum cleaner will move automatically toward the user.
If the distance remains within 1 m, the body just rotates to face
the user. The Auto Moving function does not work properly on
carpets with long hair (longer than 20 mm).
La fonction Robosense™ peut mesurer la distance entre
l'utilisateur et l'aspirateur. Après avoir évalué la distance,
l'aspirateur se déplace automatiquement pour maintenir une
distance constante (environ 1 m) entre l'utilisateur et l'aspirateur.
Lorsque la distance entre le capteur émetteur qui se trouve
sur la poignée et les capteurs récepteurs qui se trouvent sur
l'aspirateur est supérieure à 1 m, l'aspirateur se rapproche
automatiquement de l'utilisateur.
Si la distance est de moins d'1 m, le corps de l'aspirateur pivote
pour suivre l'utilisateur.
La fonction de déplacement automatique ne fonctionne pas
correctement sur les moquettes à poils longs (de plus de
20 mm).
• When using vacuum cleaner, be careful not
to block the transmitting sensor by wall or
body. If transmitting sensor was blocked,
Robosense™ function cannot work properly.
• Lorsque vous utilisez l'aspirateur, veillez à ne
pas bloquer le capteur émetteur par un mur
ou votre corps. Si le capteur émetteur a été
bloqué, la fonction Robosense™ ne peut pas
fonctionner correctement.
AVERTISSEMENT
Ne renversez pas de liquide comme de
l'eau et des boissons sur le capteur
émetteur et les capteurs récepteurs.
La fonction Robosense™ ne pourra alors
pas fonctionner correctement.
NOTICE
Do not put liquid such as
water and drink in transmitting
sensor and receiving sensors.
Robosense™ function cannot
work properly.
Transmitting sensor
Capteur émetteur
Receiving sensors
Capteurs récepteurs
• Keep the direction of grip handle to receiving sensors for
sending the signal. If the hose points the wrong direction,
Robosense™ function cannot work properly.
• Gardez la poignée dirigée vers les capteurs récepteurs
pour qu'elle puisse envoyer le signal. Si le flexible est
orienté dans la mauvaise direction, la fonction
Robosense™ ne pourra pas fonctionner correctement.
1 m
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG VR94070 NCAQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG VR94070 NCAQ in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 29,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info