618831
31
Zoom out
Zoom in
Previous page
1/240
Next page
30
CLEANING THE DUST BIN FILTER
The Dust Bin Filter consists of a HEPA Filter and Sponge Filter.
Clean both the HEPA and Sponge fi lters as per the following sequence.
3. Use a cleaning brush to clean the Sponge Filter.
If using water to clean it, allow it to dry completely
in the shade before refi tting.
4. Assemble the HEPA and Sponge fi lters back onto
the Filter housing as per the following sequence.
Fit the rectangular locator on the HEPA Filter
into the locating slot of the fi lter body.
Be careful not to incorrectly assemble HEPA
and Sponge Filter onto the Filter housing.
2. Thoroughly clean out the ne dust particles on the
HEPA Filter, with a vacuum cleaner or cleaning brush.
Do NOT wash the HEPA Filter with water.
Its suction power will be reduced.
To preserve the performance of the Robot Cleaner, clean the HEPA Filter at least once a
week, with a brush or vacuum cleaner.
The HEPA and sponge filters must be fitted to the filter housing before refitting the filter to
the dust bin. Operating the Robot cleaner without the HEPA and sponge filters will cause the
suction motor to malfunction.
Tip
1. Pull the hook on the left of the HEPA Filter
module on the rear side of Dust Bin to separate
the HEPA Filter and the sponge.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG VR64701LVMP - HOM BOT SQUARE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG VR64701LVMP - HOM BOT SQUARE in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 82,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info