618831
28
Zoom out
Zoom in
Previous page
1/240
Next page
27
SMART DIAGNOSIS
1. Smart Diagnosis will operate when the main power switch
of the Robot cleaner and the Home station are turned on,
and the unit docked on the Home station.
ٙ
Smart Diagnosis is only possible when the Robot
Cleaner is attached to the Home Station.
2. Press 'Diagnosis' button on the Remote Controller, then
the process will start with a voice message which says
"Robot Cleaner smart diagnosis will be started. Please
step away and clear around 1 meter around the home
station."
ٙ
If the Mop Plate is attached, the process will not be
activated.
3. When the Smart Diagnosis has successfully
nished, Robot Cleaner will return back to the
Home Station and inform the result through a
voice message. After the voice message, pressing
the 'HOME' button on the Remote Controller
or main unit will allow the voice message to be
repeated. To terminate the diagnosing process,
press the 'Stop/OK' button on the Remote
Controller or main unit.
ٙ
After the Smart Diagnosis voice message,
the Robot Cleaner will start recharging after
1minute.
ٙ
If an error is detected with any of the Sensors
whilst in Smart Diagnosis, a voice message will
announce, and the unit will not return to the
home station.
Robot Cleaner uses this Smart Diagnosis feature to run a self-diagnosis.
If any irregularity is found from the diagnosis, please contact the local LG Electronics
service center.
ٙ
During Smart Diagnosis, the Robot Cleaner will move about within a 50 EO radius. So, make sure no
objects are in the way within a 1 O radius around the Home Station, before starting Smart Diagnosis.
Be careful not to touch the Robot Cleaner or disturb its operation before Smart Diagnosis
is complete. If it is accidently interrupted, turn the main power switch OFF then ON again to
resume the diagnosis.
Smart Diagnosis will not be activated in each of the following cases. In each case, check the
problem and try again.
- Robot Cleaner is detached from Home Station
- Battery level is insufficient
- No Dust Bin Filter is fitted.
- Mop Plate is attached
Tip
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG VR64701LVMP - HOM BOT SQUARE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG VR64701LVMP - HOM BOT SQUARE in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 82,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info