619275
17
Zoom out
Zoom in
Previous page
1/200
Next page
16
HOW TO START AND STOP CLEANING
After the Robot Cleaner main power switch is turned on, press the
START/STOP button to begin cleaning. A melody will sound and
cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop
cleaning.
When the ‘START/STOP’ button is pressed while the power supply
of the Robot Cleaner is in Standby, the power will be turned on.
Press the ‘START/STOP’ button one more time to start cleaning.
After the Robot Cleaner is turned on from the Robotic Cleaner, press
the ‘Start’ button on the remote control. A melody will sound and
cleaning will begin.
Press the Stop/OK button during the cleaning cycle to stop cleaning.
The Robot Cleaner cannot be turned on from Standby, by using the
remote controller when the power of the Robot Cleaner is off. When
the power is off, press the ‘START/STOP’ button on the upper side
of Robot Cleaner to turn the power on and to allow the remote to
be used.
During cleaning, collisions can happen when the sensor cannot detect objects because of their shape (Thin
chairs and table legs, furniture corner). When this happens, the internal impact detecting sensor will react
by using a backward motion.
If the Robot Cleaner is set to start cleaning at a location away from the home station, put the Robot
Cleaner on a fl at oor in order to prevent a malfunction of the obstacle detecting sensor. In addition, start
cleaning from a location where there are no obstacles . For example, curtains or walls must be 30cm from
the Robot Cleaner.
For best results:
Briefly scan the area to be cleaned for big and small objects that will cause difficulty for the
Robot Cleaner.
If cleaning is started when the Robot Cleaner is at the home station, the device can rapidly
be returned to the home station as the current home position has been accurately read.
When the mop plate is installed, to prevent a 2
nd
contamination from the contaminated mop,
it will not go over door sills of 5 OO or higher.
Using the buttons on the Robot Cleaner
Using the remote controller
Tip
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG VR62601 LV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG VR62601 LV in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 61,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info