514659
30
Zoom out
Zoom in
Previous page
1/48
Next page
28
SMART DIAGNOSIS
If a voice message is announced after Smart Diagnosis, refer to the following table to take proper actions.
Voice message Measures (for reference)
Starting HOM-BOT smart diagnosis. Please step away and remove
any items within 1 meter, or about 3 feet.
Clear any object within a 1 m radius around Home Station,
and stay back until the diagnosis is complete.
HOM-BOT needs to be charging in order to activate smart
diagnosis. Please dock the HOM-BOT to the home station.
Move Robot cleaner to the Home Station to recharge it.
Starting HOM-BOT smart diagnosis. Reservation has been
cancelled for smart diagnosis. Please step away and remove any
items within 1 meter, or about 3 feet.
No defect found during diagnosis.
Unable to initiate smart diagnosis due to a low battery. Please try
again after battery is charged.
Try the Smart Diagnosis again after recharging the battery.
Please check that the dust bin and filter are properly installed.
Open the Dust Bin Cover and examine the bin.
HOM-BOT will not charge due to infrared sensor error. Please
try smart diagnosis again after turning the main power switch on
the back of the HOM-BOT 'Off' then 'On' again. If the problem
continues, please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is
announced, contact an LG Electronics service center.
HOM-BOT will not charge due to ultrasonic sensor error. Run Smart Diagnosis again and, if the same message is
announced, contact an LG Electronics service center.
HOM-BOT will not charge due to a problem with the cliff sensors
on bottom. Please wipe the sensors clean.
Clean the three Cliff Sensors on the bottom at the front of
the unit.
Please clean the camera sensor on bottom right side. Clean the lens of Camera Sensor on the bottom-right
Please clean the obstacle detecting sensor windows on the left
and right side of the HOM-BOT.
Clean the lens of the Obstacle Sensors on both the left and
right hand sides.
A problem has been found on the Gyro Sensor. Please try smart
diagnosis again after turning the main power switch on the back
of the HOM-BOT 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is
announced, contact an LG Electronics service center.
Please check for foreign material on the left wheel. Check for foreign materials on the left wheel.
Please check for foreign material on the right wheel. Check for foreign materials on the right wheel.
A problem has been found on the left wheel sensor. Please try
smart diagnosis again after turning the main power switch on
the back of the HOM-BOT 'Off' then 'On' again. If the problem
continues, please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is
announced, contact an LG Electronics service center.
A problem has been found on the right wheel sensor. Please try
smart diagnosis again after turning the main power switch on
the back of the HOM-BOT 'Off' then 'On' again. If the problem
continues, please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is
announced, contact an LG Electronics service center.
A problem has been found with the brush. Please check for any
foreign material.
Check for any foreign material stuck in the Brush.
A problem has been found in the suction motor. Please try smart
diagnosis again after turning the main power switch on the back
of the HOM-BOT 'Off' then 'On' again. If the problem continues,
please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is
announced, contact an LG Electronics service center.
A problem has been found in the acceleration sensor. Please try
smart diagnosis again after turning the main power switch on
the back of the HOM-BOT 'Off' then 'On' again. If the problem
continues, please contact LG Electronics customer care.
Run Smart Diagnosis again and, if the same message is
announced, contact an LG Electronics service center.
In order to listen to the smart diagnosis result again, please press
the charging button. To stop, please press the stop button.
If you need to repeat the diagnosis result, press the 'Home'
button, or press 'Stop' button to finish the diagnosis.
Smart diagnosis mode will be turned off.
Smart Diagnosis mode will not operate with the mop plate
attached. Please try again after removing it.
Run Smart Diagnosis again after removing the Mop Plate.
Smart diagnosis has failed to complete its diagnostics. Please
try again after turning the main power switch on the back of the
HOM-BOT 'Off' then 'On' again.
Turn the main power switch OFF and then ON again to
resume the diagnosis. Do NOT touch the robot or disturb its
operation until the diagnosis is complete.
Please check if the charging terminal is damaged or dirty.
Clean the bottom of the machine and Charging Terminal on Home Station.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG VCARPETX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG VCARPETX in the language / languages: English as an attachment in your email.

The manual is 29,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LG VCARPETX

LG VCARPETX User Manual - German - 48 pages

LG VCARPETX User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info