1
Press the Start/Stop button.
The unit will respond with a beep.
2
To select Auto Operation, press the Operation Mode Selection
button.
Each time the button is pressed, the operation mode is shifted in
the direction of the arrow.
3
The temperature and fan speed are automatically set by the
electronic controls based on the actual room temperature. If you
want to change the set temperature, close the door on the remote
control and press the Room Temperature Setting buttons. The
cooler or warmer you feel, the more times (up to two times) you
should press the button. The set temperature will then be changed
automatically.
During Auto Operation:
❏ You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule.
❏ If the system is not operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating to cooling, it must be
done by manually resetting.
❏ During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down
automatically. If you want to stop auto-swing, press the chaos swing button again.
Auto Operation
