815648
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
When Installing Behind the TV Screen
1. Place the Zero Connect Box lower than the wireless receiver of the
TV screen.
2. Before turning on the TV, ensure that the front LED of the Zero Connect
Box is facing the wireless signal receiver of the TV screen.
3. If the front LED is not facing the wireless signal receiver of the TV screen,
turn the dial on the top of the Zero Connect Box left or right to adjust the
direction of the sliding button to face the wireless signal receiver.
4. Adjust the sliding button on the Zero Connect Box in the opposite
direction of the top LED.
Once the dial and sliding button adjustments are completed, the signal
transmission and reception path should be in the green direction shown
in the figure.
5. After turning on the TV, check if the top LED colour of the Zero Connect
Box is blue.
If the LED is not blue, adjust the dial and sliding button further to
optimise the signal condition.
Ensure that there are no obstacles in the antenna transmission path.
Install the Zero Connect Box within 1m of the TV screen. (provided that
there are no obstacles in the way.)
Position the Zero Connect Box between the legs of the floor stand so it
is not obstructed.
Connecting External Terminals
You can connect external devices such as cables, HDMI, and set-top boxes to
the TV. Press the Input button ( ) on the remote control, select [Home
Hub], and find the device you wish to connect from the menu displayed on
the screen.
When used with an external device using a 60GHz frequency, the screen
may fail to display due to mutual interference.
Set the appropriate resolution and frequency for the connected device.
Failure to do so may cause straining of the eyes.
The detailed installation method may vary depending on the TV model.
Installing Antenna/Cable
Insert the coaxial cable that transmits audio/video signals into the
antenna/cable input terminal or antenna input terminal on the back of
the Zero Connect Box.
Be careful not to bend the copper wire when connecting the coaxial
cable.
Use a signal amplifier if the signal is weak.
When using one antenna for two or more TVs, use a signal splitter.
Note
Do not apply oil or lubricant to the screws used during installation.
Doing so may cause the TV to malfunction.
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable
(75Ω). (Depending on model)
HDMI
Use an HDMI certified cable (less than 3m) with the HDMI logo (high-
Speed HDMI®/™ cable).
Turn off the power of the TV and all connected devices, and unplug them
from the socket before connecting the HDMI cable.
Connecting a device that supports the HDMI Ultra HD Deep Colour
feature to the TV will provide a clearer image. If you connect a device
that does not support this feature and enable the feature, it may not
work properly. If problems arise, change the settings.
Note
HDMI audio support formats may vary depending on the TV model.
HDMI devices should have bezels less than 10mm thick and 18mm
width.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG OLED97M39 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG OLED97M39 in the language / languages: English as an attachment in your email.

The manual is 2.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LG OLED97M39

LG OLED97M39 User Manual - German - 20 pages

LG OLED97M39 User Manual - Dutch - 20 pages

LG OLED97M39 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info