615693
14
Zoom out
Zoom in
Previous page
1/78
Next page
Connecting14
Connecting
2
Wireless speakers
connection
Setting up the wireless
receiver for the first time
1. Connect the power cord of the wireless receiver
to the outlet.
2. When you turn on the main unit, the wireless
speakers connection will be completed
automatically.
-
When the connection is completed, you can
see the yellow-green LED on the wireless
receiver and the indicator ( ) on the main
unit.
LED indicator of wireless receiver
LED Color Operation
Yellow-green
(Blink)
The wireless receiver is trying to
connect.
Yellow-green The connection is completed.
Red
The wireless receiver is
in standby mode or the
connection is failed.
O
(No display)
The power cord of wireless
receiver is disconnected.
y
If there is a strong electromagnetic wave
product nearby, interference may occur. Put
the unit (wireless receiver and main unit)
away from there.
y
It takes a few seconds (and may take longer)
for the main unit and the wireless receiver
to communicate with each other.
y
The available range is 20 m for wireless
connection in an open place.
,
Note
Manually pairing wireless
receiver
When your connection is not completed, you can
see the red LED or the blinking yellow-green LED
on the wireless receiver and the rear speakers are
not made sound. To solve the problem, follow the
below steps.
1. Adjust the volume level of the main unit to
minimum.
-
VOL MIN” appears on the display window.
2. Press and hold (MUTE) on the remote control
for about 3 seconds.
-
WL RESET appears on the display window
briey.
3. If the LED of the wireless receiver already blinks
in yellow-green continually, you can skip this
step.
Press and hold PAIRING on the rear of the
wireless receiver for more than 5 seconds.
-
The LED of the wireless receiver lights up
alternately in red and yellow-green.
4. Disconnect the power cord of the main unit
and the wireless receiver.
5. Connect them again after the LED of the main
unit and the wireless receiver are fully turned
off.
The main unit and the wireless receiver will
be paired automatically when you turn on the
main unit.
-
When the connection is completed, you can
see the yellow-green LED on the wireless
receiver and the indicator ( ) on the main
unit.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG LHB725W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG LHB725W in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LG LHB725W

LG LHB725W User Manual - German - 78 pages

LG LHB725W User Manual - Dutch - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info