Settings
81
Handset lock
You can lock your phone. The following
4 lock functions are available.
When switching on: Locks the handset
whenever the handset is switched on.
If USIM changed: Locks the handset
when the phone's USIM card has been
changed.
Immediate: Locks the handset
immediately.
None: Deactivates the lock function.
You are requested to enter the security
code to confirm the selection.
]
To unlock the handset, you need to
enter the security code.
Change codes
You can change the PIN, PIN2, and the
mobile phone password.
PIN code
PIN is the abbreviation for Personal
Identification Number, and is used to
restrict use by an unauthorised user.
PIN code change procedure
1. Select ‘PIN code’ from the ‘Change
codes' list and then press .
2. Enter the current PIN code, and
press .
3. Enter the new PIN code, and
press .
4. Enter the new PIN code once again,
and press .
]
If the PIN code is different from that
of step 3, the procedure is restarted
from step 3.
5. When the PIN code is changed
properly, a Changed message is
displayed. If you enter an incorrect
PIN code in step 2, the procedure is
restarted from step 2, and the
number of attempts you have left to
enter the number decreased by 1.
]
The maximum number of times you may
enter the PUK code is 10. (Note: If you
enter an incorrect PUK code 10 times,
the USIM card will be blocked and must
be replaced.)
]
If the PIN code request cannot be
disabled by operator settings, you will not
be able to choose this menu item.
