459154
9
Zoom out
Zoom in
Previous page
1/36
Next page
OPERATION
-9-
Programming Russian Cook Basic, Specialty, French, and Rapid Bread
1. Open the lid and remove the bread pan. Pull straight up, using the handle.
2. Mount the kneading blade on the shaft.
NOTE: Polyoxymethylene copolymer identified in
“Kneading-Blade” section may be safely used as an
article or component of articles intended for food-
contact use in accordance with the “FDA” prescribed
conditions.
CAUTION: If you use breadmaker without material,
“Kneading-Blade” could be melt.
Please, operate breadmaker with ingredients.
3. Place all ingredients in the bread pan. Make sure not to omit any ingredients.
NOTE: Particularly when using the timer, add the yeast on top of the flour and away from the
liquid. This is critical for good results.
4. Place the bread pan in the bread maker.
5. Close the lid slowly and tightly using the handle. Plug in the breadmaker.
6. Select the desired Program (Press the Menu pad to select BREAD PROGRAM) and Baking
Control(light, medium, or dark crust). The program and baking control indicator should light up
in the display window.
7. Press the “ START” pad.
Notice that the time left for the bread to be finished is displayed 3:30 and counts down(1:59 for
Rapid Bread). For the French cycle, the time displayed will be 4:00 and the first 20 minutes will
be pre-heat time to warm the ingredients and allow the flour time to absorb water.
NOTE: For the Russian Cook, Basic and the Specialty program, about 15 minutes from the start(and 9
minutes before the second kneading is finished), 8 beeps indicate the time to add any additional
ingredients, such as raisins, nuts, cheese, etc. The indicator panel will show 3:15.
For the French program, about 1 hour and 26 minutes from the start(and 9 minutes before the
second kneading is finished), 8 beeps indicate the time to add any additional ingredients such as
raisins, nuts, etc. The indicator panel will show 2:34.
For the Rapid program, about 14 minutes from the start(and 5 minutes before the second kneading
is finished), 8 beeps indicate the time to add any additional ingredients such as raisins, nuts, etc.
The indicator panel will show 1:45. Open the lid and add ingredients quickly and evenly over the
dough. Opening the lid at this time will not stop the kneading, so be careful. Close the lid. The unit
will continue through the remaining stages automatically.
CAUTION: Do not touch the breadmaker, because it is very hot during baking. Do not open the
lid during the rise or bake cycles.
Heat will escape and final result may be affected.
8. The beeper will sound 8 times indicating the bread is done and cooled. After bread is done if you
do not take the bread out of the breadmaker immediately, the bread is kept warm for 3 hours,
[:H]is displayed. After 3 hours, [END]is displayed.
The Rapid and Dough programs do not have the cool feature. The Dough and Jam program
does not have the hold-warm feature.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG HB 1001CJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG HB 1001CJ in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info