Manual LG GC480W (page 15 of 16) (English)

558286

Zoom out

Zoom in

1/16

Controlling your TV with the supplied remote control and

technical specifications

Specifications are correct at time of printing. LG is constantly innovating and products may change

at any time without warning.

Specifications

General

Power 110-240V~, 50/60Hz

Power consumption Approx. 12 Watts (Energy Saving mode: 3 Watts)

Video Head System Double azimuth 4 heads, helical scanning (GC990W/GC480W)

Rotary 2 heads, helical scanning (GC260W)

Tape speed PAL: 23.39 mm/sec (SP mode) 11.69 mm/sec (LP mode)

NTSC: 33.35 mm/sec (SP mode) 11.12 mm/sec (LP mode)

Tape Format Tape width 12.7mm (0.5 inch)

Max. recording time PAL: 4 hours (SP mode, E-240 Tape) 8 hours (LP mode, E-240 Tape)

NTSC: 2 hours (SP mode, T-120 Tape) 8 hours (EP mode, T-160 Tape)

Rewind time Approx. 65 (±10) secs (E-180 tape)

Dimensions 360 x 82 x 230mm (W x H x D)

Weight 2.87kg

Operating temperature 5º C - 35º C

Operating humidity Less than 80%

Timer 24 hours display type

Video

Television system CCIR standard (625 lines, 50 fields)

PAL(B/G, D/K)/SECAM(B/G, D/K) colour signal

Recording format PAL/MESECAM/NTSC 3.58/NTSC 4.43

RF reception PAL B/G, SECAM B/G

RF OUT PAL G

Input level VIDEO IN (RCA) 1.0 Vp-p, 75 Ohm unbalanced

Output level VIDEO OUT (RCA) 1.0 Vp-p, 75 Ohm unbalanced

Signal to noise ratio More than 43 dBm

RF modulator UHF channel 28-68 (Adjustable)

Audio

Input level AUDIO IN (RCA)

- 6.0 dBm, more than 47 kohms

Output level AUDIO OUT (RCA)

- 6.0 dBm, less than 1 kohms

Track Mono track & Hi - Fi Track

Frequency response Normal : 100 Hz - 10 kHz (-6/+3 dBm)

Hi - Fi : 20 Hz - 20 kHz (-3/+3 dBm)

Signal to noise ratio Hi-Fi : More than 70 dB (JIS A filter)

Dynamic range Hi-Fi : More than 85 dB (JIS A filter)

You can control the sound level, input

source, and power switch of your LG

TV with the supplied remote control.

By pressing You can

TV POWER Turn the TV on or off.

TV PR +/– Scans up or down through

memorized channels.

TV VOL +/– Adjust the volume of

the TV.

TV AV Switch the TV’s input

source between the TV

and other input sources.

Controlling other TVs

with the remote control

You can control the sound level, input

source, and power switch of non-LG

TVs as well. If your TV is listed in the

table below, set the appropriate

manufacturer code.

1 While holding down TV POWER

button, press the number

buttons to select the

manufacturer code for your TV

(see the table on the right).

2 Release TV POWER button.

Code numbers of

controllable TVs

If more than one code number is list-

ed, try entering them one at a time

until you find the one that works with

your TV.

Manufacturer Code Number

LG / GoldStar 1 (Default), 2

Zenith 1, 3, 4

Samsung 6, 7

Sony 8, 9

Hitachi 4

Notes

• Depending on your TV, some or all

buttons may not function on the

TV, even after entering the correct

manufacturer code.

• If you enter a new code number,

the code number previously

entered will be erased.

• When you replace the batteries of

the remote, the code number you

have set may be reset to the

default setting. Set the appropriate

code number again.

GC990W1_GC480W1_NA2ALL_07V 3/10/04 1:56 PM Page 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of LG GC480W in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

LG GC480W Manual

Product: