SETTING UP AND TEST RUN 5
• Clean the refrigerator thoroughly;
Wipe the outside with a soft cloth, the inside with a wet,
lukewarm cloth.
• Connect to receptacle for proper AC voltage:
Keep the door open and turn thermostat dial to 0.
• Set the thermostat dial on 6 or 7:
Close the door and let motor run for 15-20 minutes. Then
open the door. The evaporator should show some traces of
frost. If the motor runs smoothly with just a soft hum,
operation is satisfactory.
• If test run is not satisfactory:
Check your electricity voltage. Insufficient or unstable
voltage affects the performance of the refrigerator. If
source of trouble cannot be located, please contact your
dealer immediately.
Temperature control
You can control the inside temperature of the refrigerator
by turning the thermostat dial. Smaller numbers mean less
cooling power, higher numbers greater cooling power. To
make ice cubes in a hurry or to keep icecream frozen in the
freezer compartment, set dial to 6 or 7. The dial does not
have to be set exactly on the numbers. The thermostat does
not operate in stages, but continuously.
TEST RUN