815885
23
Zoom out
Zoom in
Previous page
1/52
Next page
OWNER'S MANUAL
WASHING MACHINE
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
F*V309*N*
MFL71797386
Rev.03_051622
www.lg.com
Copyright © 2021-2022 LG Electronics Inc. All Rights Reserved.
global_main.book.book Page 1 Monday, August 17, 2020 8:48 AM
TABLE OF CONTENTS
This manual may contain images or
content that may be different from the
model you purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE...........................................................3
WARNING............................................................................................................3
CARING FOR THE ENVIRONMENT....................................................................7
INSTALLATION
Parts and Specifications ..................................................................................10
Installation Place Requirements ....................................................................12
Unpacking the Appliance ................................................................................14
Levelling the Appliance ...................................................................................15
Connecting the Water Supply Hose...............................................................16
Installing the Drain Hose ................................................................................18
OPERATION
Operation Overview.........................................................................................19
Control Panel ....................................................................................................21
Preparing the Wash Load ...............................................................................24
Adding Detergents and Softeners .................................................................25
Programme Table ............................................................................................28
Extra Options and Functions ..........................................................................34
SMART FUNCTIONS
LG ThinQ Application.......................................................................................37
Smart Diagnosis ...............................................................................................37
MAINTENANCE
Cleaning After Every Wash..............................................................................39
Cleaning the Appliance Periodically & Performing an Emergency Water
Evacuation.........................................................................................................40
TROUBLESHOOTING
Before Calling for Service................................................................................43
global_main.book.book Page 2 Monday, August 17, 2020 8:48 AM
4
SAFETY INSTRUCTIONS
Children of less than 3 years should be kept away unless continuously
supervised.
If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
Ventilation openings must not be obstructed by a carpet.
This appliance is intended to be used in household only.
Use a new hose or hose-set supplied with the appliance. Reusing old
hoses can cause a water leak and subsequent property damage.
The water pressure must be between 50 kPa and 800 kPa.
Maximum Capacity
The maximum capacity in some cycles for dry clothes to be washed is:
9 kg.
The recommended maximum capacity for each washing programme
may differ. To get good wash results, please refer to
Programme
Table
in
OPERATION
chapter for further details.
Installation
Never attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
This appliance should only be transported by two or more people
holding the appliance securely.
Do not install the appliance in a damp and dusty place. Do not install
or store the appliance in any outdoor area, or any area that is subject
to weathering conditions such as direct sunlight, wind, rain, or
temperatures below freezing.
Make sure the power plug is completely pushed into the power
outlet.
Do not plug the appliance into multiple outlet sockets, power boards,
or an extension power cable.
global_main.book.book Page 4 Monday, August 17, 2020 8:48 AM
6
SAFETY INSTRUCTIONS
(such as waxes, wax removers, oil, paint, gasoline, degreasers,
drycleaning solvents, kerosene, petrol, spot removers, turpentine,
vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can
cause fire or explosion.
Do not use or store flammable or combustible substances (ether,
benzene, alcohol, chemical, LPG, combustible spray, gasoline,
thinner, petroleum, insecticide, air freshener, cosmetics, etc.) near
the appliance.
Never reach into the appliance while it is operating. Wait until the
drum has completely stopped.
Do not touch the door during a high temperature programme.
In case of a water leak from the appliance or flood, disconnect the
power plug and contact the LG Electronics customer information
centre.
Turn off water taps to relieve pressure on hoses and valves and to
minimize leakage if a break or rupture should occur. Check the
condition of the fill hoses; they should be replaced after 5 years.
If there is a gas leakage (isobutane, propane, natural gas, etc.) within
the home, do not touch the appliance or power plug and ventilate the
area immediately.
If the drain hose or inlet hose is frozen during winter, use it only after
thawing.
Keep all washing detergents, softener and bleach away from
children.
Do not touch the power plug or the appliance controls with wet
hands.
Do not bend the power cable excessively or place a heavy object on it.
Avoid touching any water that is drained from the appliance during
the wash.
Make sure that drainage is working properly. If water is not drained
properly, your floor may get flooded.
When the air temperature is high and the water temperature is low,
condensation may occur and thus wet the floor.
Wipe off dirt or dust on the contacts of the power plug.
global_main.book.book Page 6 Monday, August 17, 2020 8:48 AM
7
SAFETY INSTRUCTIONS
ENGLISH
Maintenance
Disconnect the appliance from the power supply before cleaning the
appliance. Setting the controls to the OFF or stand by position does
not disconnect this appliance from the power supply.
Securely plug the power plug in the outlet socket after completely
removing any moisture and dust.
Do not spray water inside or outside the appliance to clean it.
Never unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the outlet
socket.
Only qualified service personnel from LG Electronics service centre
should disassemble, repair, or modify the appliance. Contact an LG
Electronics customer information centre if you move and install the
appliance in a different location.
Disposal
Before discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
Dispose of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause
suffocation.
Remove the door before disposing of or discarding this appliance to
avoid the danger of children or small animals getting trapped inside.
CARING FOR THE ENVIRONMENT
Environmental and Economical Tips
Energy and water consumption
Water consumption and energy usage can be affected by the weight
of the load. To make the best use of your appliance, load the
maximum amount of dry clothes for the particular programme.
The most efficient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer
duration.
global_main.book.book Page 7 Monday, August 17, 2020 8:48 AM
8
SAFETY INSTRUCTIONS
Noise and remaining moisture content are influenced by the spinning
speed: the higher the spinning speed in the spinning phase, the
higher the noise and the lower the remaining moisture content.
Evenly loading laundry up to the capacity indicated by the
manufacturer for the respective programmes will contribute to
energy and water savings.
For washing smaller amounts of clothes, the automatic load
recognition system will help reduce the amount of water and energy
usage.
Use the Speed programme for small, lightly soiled loads.
Cold water laundry detergents can be as effective at lower
temperatures (about 20 ). Using 20 settings will use less energy
than 30 or higher temperatures.
Detergent
Detergent should be chosen according to type, colour, soiling of the
fabric and the washing temperature. And it should be used according
to the instruction of the detergent manufacturer. Use only
detergents that are suitable for Drum (front load) type washers.
Use less detergent on smaller loads.
- Partial load: 1/2 of the normal amount.
- Minimum load: 1/3 of full load.
Selecting Extra Options and Functions
Select the water temperature suitable for the type of load you are
washing. Follow the garment fabric care labels for best results.
The Pre Wash option is recommended for washing a heavily soiled
load.
global_main.book.book Page 8 Monday, August 17, 2020 8:48 AM
9
SAFETY INSTRUCTIONS
ENGLISH
Disposal of Your Old Appliance
This crossed-out wheeled bin symbol indicates that waste
electrical and electronic products (WEEE) should be
disposed of separately from the municipal waste stream.
Old electrical products can contain hazardous substances
so correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health. Your old appliance may contain reusable
parts that could be used to repair other products, and
other valuable materials that can be recycled to conserve
limited resources.
You can take your appliance either to the shop where you
purchased the product, or contact your local government
waste office for details of your nearest authorised WEEE
collection point. For the most up to date information for
your country, please see www.lg.com/global/recycling.
global_main.book.book Page 9 Monday, August 17, 2020 8:48 AM
10
INSTALLATION
INSTALLATION
Parts and Specifications
NOTE
Appearance and specifications may change without notice to improve the quality
of the appliance.
Front View
a
Control Panel
b
Detergent Dispenser Drawer
c
Drum
d
Door
e
Cover Cap
f
Drain Plug
g
Drain Pump Filter
h
Levelling Feet
Rear View
a
Power Plug
b
Transit Bolts
c
Drain Hose
global_main.book.book Page 10 Monday, August 17, 2020 8:48 AM
11
INSTALLATION
ENGLISH
Accessories
*1 The included accessories vary depending on the model you purchased.
Specifications
Dimension(mm)
a
Cold Supply Hose
d
Anti–slip Sheets*1
b
Spanner
e
Elbow Bracket for Securing Drain
Hose
c
Caps for Covering Transit Bolt
Holes
f
Tie Strap
*1
Model
F*V309*N*
Power Supply 220240 V~, 50 Hz
Product Weight
68 kg
W 600 D 565 D'' 1100
H850D'620
W
D
D’’
D’
H
global_main.book.book Page 11 Monday, August 17, 2020 8:48 AM
12
INSTALLATION
Installation Place
Requirements
Before installing the appliance, check the
following information to make sure that
the appliance should be installed in a
correct place.
Installation Location
This appliance must be installed on
firm flooring to minimize vibration
during the spin cycle. Concrete
flooring is best, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
If it is impossible to avoid positioning
the appliance next to a gas cooker or
coal burning stove, an insulation (850 X
600 mm) covered with aluminum foil
on the side facing the cooker or stove
must be inserted between the two
appliances.
Ensure that when the appliance is
installed, it is easily accessible for an
engineer in the event of a breakdown.
When installing the appliance, adjust
all four feet using the transit bolt
spanner provided to ensure the
appliance is stable.
Floor Installation
To ensure sufficient clearance for water
inlet hoses, drain hose and airflow, allow
minimum clearances of at least 20 mm at
the sides and 100 mm behind the
appliance. Be sure to allow for wall, door,
or floor moldings that may increase the
required clearances.
WARNING
This appliance must only be used for
domestic household purposes and
should not be used in mobile
applications.
NOTE
Never try to level any uneven floor by
putting pieces of wood, cardboard or
similar materials under the appliance.
Wooden Floors (Suspended
Floors)
When installing the appliance on
wooden floors, use rubber cups to
reduce excessive vibration and
unbalance. Timber or suspended type
flooring may contribute to excessive
A
100 mm
B
5 mm
C
20 mm
A
C
B
C
global_main.book.book Page 12 Monday, August 17, 2020 8:48 AM
13
INSTALLATION
ENGLISH
vibration and unbalance, errors and
malfunction.
To reduce vibration, we recommend
placing at least 15 mm thickness of
rubber cups
a
under each adjusting
foot of the appliance, secured to at
least two floor beams with screws.
If possible, install the appliance in one
of the corners of the room, where the
floor is more stable.
Fit the rubber cups to reduce vibration.
CAUTION
If the appliance is installed on the
unstable floor (e.g. wooden floor), the
warranty does not cover any damages
and cost occurred due to the
installation on the unstable floor.
NOTE
You can purchase rubber cups (part
No.
4620ER4002B
) from the LG service
centre.
Ventilation
Make sure that air circulation around
the appliance should not be impeded
by carpets, rugs, etc.
Ambient Temperature
Do not install the appliance in rooms
where freezing temperatures may
occur. Frozen hoses may burst under
pressure. The reliability of the
electronic control unit may be
impaired at temperatures below
freezing point.
If the appliance is delivered in winter
and temperatures are below freezing,
place the appliance at room
temperature for a few hours before
putting it into operation.
Electrical Connection
Do not use an extension cord or
double adapter.
Always unplug the appliance and turn
off the water supply after use.
Connect the appliance to an earthed
socket in accordance with current
wiring regulations.
The appliance must be positioned so
that the plug is easily accessible.
Power outlet must be within 1 meter of
either side of the appliance.
WARNING
Repairs to the appliance must only be
carried out by qualified personnel.
Repairs carried out by inexperienced
persons may cause injury or serious
malfunctioning. Contact your local
authorised LG repairer.
The power plug must be plugged into
an appropriate outlet socket that is
installed and grounded/earthed in
accordance with all local codes and
ordinances.
global_main.book.book Page 13 Monday, August 17, 2020 8:48 AM
15
INSTALLATION
ENGLISH
Levelling the Appliance
Checking the Level
When pushing down the edges of the
top plate diagonally, the appliance
should not move up and down at all
(check both directions).
If the appliance rocks when pushing
the top plate of the appliance
diagonally, adjust the feet again.
Check whether the appliance is
perfectly level after installation.
NOTE
Timber or suspended type flooring
may contribute to excessive vibration
and unbalance. Reinforcement or
bracing of the timber floor may need
to be considered to stop or reduce
excessive noise and vibration.
Adjusting and Levelling the
Feet
When installing the appliance, the
appliance should be aligned and
perfectly level. If the appliance is not
aligned and level properly, the appliance
may be damaged or may not operate
properly.
1
Turn the levelling feet as required if
the floor is uneven.
Do not insert pieces of wood etc.
under the feet.
Make sure that all four feet are
stable and resting on the floor.
NOTE
Do not install the washing machine on
a plinth, stand or elevated surface
unless it is manufactured by LG
Electronics for use with this model.
2
Check if the appliance is perfectly
level using a spirit level
a
.
3
Secure the levelling feet with the lock
nuts
b
by turning anti-clockwise
against the bottom of the appliance.
4
Check if all lock nuts at the bottom of
the appliance are secured properly.
NOTE
Proper placement and levelling of the
appliance will ensure long, regular,
and reliable operation.
The appliance must be 100%
horizontal and stand firmly in position
on a hard flat floor.
global_main.book.book Page 15 Monday, August 17, 2020 8:48 AM
17
INSTALLATION
ENGLISH
No further backflow protection
required for connection to the water
inlet.
Checking the Rubber Seal
Two rubber seals
a
are supplied with
the water supply hose. They are used to
prevent water leaks. Connection to taps
is sufficiently tight.
Do not use mechanical devices such as
multi grips to tighten the water supply
hose. Ensure that the curved end of
the water supply hose is connected to
the appliance.
Connecting the Hose to the
Water Tap
Connecting Screw-Type Hose to Tap
with Thread
Screw the supply hose connector onto
the water supply tap. Hand tighten only
with the aid of a soft cloth. Do not
overtighten the supply hose with any
mechanical device.
NOTE
After connecting the water inlet hose
to the water tap, turn on the water tap
to flush out foreign substances (dirt,
sand, sawdust, and etc.) in the water
lines. Let the water drain into a bucket,
and check the water temperature.
Connecting the Hose to the
Appliance
Screw the supply hose to the water inlet
valve on the back of the appliance.
Do not connect the hose to the hot
water supply for models with one
water inlet. Connect to the cold water
supply only.
NOTE
After completing connection, if water
leaks from the hose, repeat the same
steps. Use the most conventional type
of tap for the water supply. In case that
the tap is square or too big, remove
the guide plate before inserting the
tap into the adaptor.
Make sure that the hose should not be
kinked or trapped.
global_main.book.book Page 17 Monday, August 17, 2020 8:48 AM
18
INSTALLATION
Installing the Drain
Hose
Installing the Drain Hose with
the Elbow Bracket
The drain hose should not be placed
higher than
100 cm
above the floor.
Water in the appliance may not drain or
may drain slowly.
Securing the drain hose correctly will
protect the floor from damage due to
water leakage.
If the drain hose is too long, do not
force it back into the appliance. This
will cause abnormal noise.
When installing the drain hose to a
sink, secure it tightly with string.
105 cm
global_main.book.book Page 18 Monday, August 17, 2020 8:48 AM
20
OPERATION
Press the cycle button repeatedly or
turn the cycle selector knob until
the desired cycle is selected.
Now select a wash temperature
and spin speed. Pay attention to the
fabric care label of your clothes.
7
Begin cycle.
Press the
Start/Pause
button to
begin the cycle. The appliance will
agitate briefly without water to
measure the weight of the load. If
the
Start/Pause
button is not
pressed within a certain time, the
appliance will shut off and all
settings will be lost.
8
End of cycle.
When the cycle is finished, a melody
will sound. Immediately remove
your clothing from the appliance to
reduce wrinkling.
global_main.book.book Page 20 Monday, August 17, 2020 8:48 AM
21
OPERATION
ENGLISH
Control Panel
The actual control panel may differ from model to model.
Control Panel Features
Description
a
Power
On/Off Button
Press this button to turn the washing machine on.
b
Programme Knob
Programmes are available according to the clothes type.
The lamp will light up to indicate the selected programme.
c
Start/Pause
Button
This button is used to start the wash cycle or pause the wash cycle.
If a temporary stop of the wash cycle is needed, press this button.
d
Extra Options and Functions
To use the extra functions, press and hold the corresponding button for 3
seconds. The corresponding symbol lights up in the display.
This allows you to select an additional programmes and will light when
selected.
e
Customizing Washing Programme Buttons
Use these buttons to adjust the water temperature or spin speed settings for
the selected programme.
The current settings are shown in the display.
Press the button for that option to select other settings.
global_main.book.book Page 21 Monday, August 17, 2020 8:48 AM
22
OPERATION
Time and Status Display
f
Display
The display shows the settings, estimated remaining time, options, and
status messages. When the appliance is turned on, the default settings in
the display will illuminate.
While the load weight is sensed automatically, the display on the control
panel blinks.
Description
a
AI DD
AI DD
M
provides the appropriate drum rotation actions after load sensing
is completed.
M
is activated when the
Cotton
,
Mixed Fabric
, and
Easy Care
programmes are selected and operated.
b
Programme Status Indicators
When a washing programme is running, LED for the active stage will blink,
and the LEDs for the remaining stages will remain steady. Once a stage is
complete, the LED will turn off. If a cycle is paused, the active stage LED will
stop blinking.
Description
global_main.book.book Page 22 Monday, August 17, 2020 8:48 AM
23
OPERATION
ENGLISH
c
Estimated Time Remaining
When a washing programme is selected, the default time for that
programme is displayed. This time will change as options are selected.
If the display shows
---
, then the time will be displayed after the load
sensing has detected the load size. This is normal.
The time shown is only an estimate. This time is based on normal operating
conditions. Several external factors (load weight, room temperature,
incoming water temperature, etc.) can affect the actual time.
d
q
lights up when the beep is off.
e
i
lights up when the control panel is locked except for the
Power
button.
f
H
lights up when the programme starts and the door is locked.
Description
global_main.book.book Page 23 Monday, August 17, 2020 8:48 AM
24
OPERATION
Preparing the Wash
Load
Sort the wash load for best washing
results, and then prepare the clothes
according to the symbols on their care
labels.
Sorting the Clothes
For best washing results, sort your
clothes according to the care label
stating fabric type and washing
temperature. Adjust the spin speed or
spin intensity in accordance with the
fabric type.
Soil level (Heavy, Normal, Light):
Separate clothes according to soil
level. If possible, do not wash heavily
soiled items with lightly soiled ones.
Colour (White, Lights, Darks): Wash
dark or dyed clothes separately from
whites or light colours. Mixing dyed
clothes with light clothes can result in
dye transfer or discolouration of
lighter clothes.
Lint (Lint producers, Collectors): Wash
separately lint producing fabrics from
lint collecting fabrics. Lint producers
can result in pilling and linting on the
lint collectors.
Checking the Clothes Care Label
The symbols tell you about the fabric
content of your garment and how it
should be washed.
Symbols on the Care Labels
NOTE
The dashes under the symbol give you
information about the type of fabric
and the maximum allowance of
mechanical stress.
Checking the Clothes before
Loading
Combine large and small items in a
load. Load large items first.
Large items should not be more than
half of the total wash load. Do not
wash single items. This may cause an
unbalanced load. Add one or two
similar items.
Check all pockets to make sure that
they are empty. Items such as nails,
hair clips, matches, pens, coins and
keys can damage both your appliance
and clothes.
Symbol Wash / Fabric type
Normal Wash
Cotton, Mixed Fabrics
Easy Care
Synthetic, Mixed Fabrics
Special Delicate Wash
Delicates
Hand Wash Only
Wool, Silk
Do not wash
Symbol Wash / Fabric type
global_main.book.book Page 24 Monday, August 17, 2020 8:48 AM
25
OPERATION
ENGLISH
Wash delicates (stockings, underwired
bras) in a wash net.
Close zippers, hooks and strings to
make sure that these items do not
snag on other clothes.
Pre-treat dirt and stains by brushing a
small amount of detergent dissolved
water onto stains to help lift dirt.
Adding Detergents and
Softeners
Detergent Dosage
Detergent should be used according to
the instruction of the detergent
manufacturer and selected according
to type, colour, soiling of the fabric and
the washing temperature. Use only
detergents that are suitable for Drum
(front load) type washers.
If too many suds occur, reduce the
detergent amount.
If too much detergent is used, too
many suds can occur and this will
result in poor washing results or cause
heavy load to the motor.
If you wish to use liquid detergent,
follow the guidelines provided by the
detergent manufacturer.
You can pour liquid detergent directly
into the main detergent drawer if you
are starting the wash cycle
immediately.
Do not use liquid detergent if you are
using the
Delay End
function, or if you
have selected
Pre Wash
option, as the
liquid will dispense immediately and
may harden in the drawer or the tub.
Detergent usage may need to be
adjusted for water temperature, water
hardness, size and soil level of the
load. For best results, avoid
overdosing the detergent. Failing to do
so will cause oversudsing.
Refer to the label of the clothes, before
adding the detergent and choosing
the water temperature.
Use only suitable detergents for the
respective type of clothing:
- Liquid detergent is often designed
for special applications, e.g. for
coloured fabric, wool, delicate or
dark clothes.
- Powdered detergent is suitable for
all types of fabric.
- For better washing results of white
and pale garments, use powdered
detergent with bleach.
- Detergent is flushed from the
dispenser at the beginning of the
wash cycle.
NOTE
Do not let the detergent harden. Doing
so may lead to blockages, poor rinse
performance or odour.
Full load: According to manufacturer’s
recommendation.
Part load: 1/2 of the normal amount.
Minimum load: 1/3 of full load.
Using the Dispenser
To add detergent dosage to the
dispenser:
1
Open the dispenser drawer.
global_main.book.book Page 25 Monday, August 17, 2020 8:48 AM
26
OPERATION
2
Add the detergent and softener into
the appropriate compartments.
a
Main wash detergent
compartment
b
Pre-wash detergent compartment
c
Liquid fabric softener
compartment
3
Gently close the detergent dispenser
drawer before starting the cycle.
Slamming the drawer closed may
result in the detergent overflowing
into another compartment or
dispensing into the drum earlier
than programmed.
Be careful not to get a hand caught
in the drawer while closing.
It is normal for a small amount of
water to remain in the dispenser
compartments at the end of the
cycle.
Fabric Softener Compartment
This compartment holds liquid fabric
softener, which is automatically
dispensed during the final rinse cycle.
Either powdered or liquid fabric softener
may be used.
Pour fabric softer to the maximum fill
line. Pouring excessive fabric softener
over the maximum fill line can cause it
to dispense too early, which may stain
the clothes.
NOTE
Do not pour fabric softener directly
onto the clothes in the wash drum,
doing so will cause dark staining on
the clothes that will be difficult to
remove.
Do not leave the fabric softener in the
detergent drawer for more than 1 day.
Fabric softener may harden. Softener
may remain in the dispenser if it is too
thick. The softener should be diluted if
the consistency is too thick so that it
can flow easily.
Do not open the drawer when water is
being supplied during the wash.
Solvents (benzene, etc.) must never be
used.
Adding Detergent Tablets
Detergent tablets can also be used when
washing.
1
Open the door and put detergent
tablets into the drum before loading
the clothes.
2
Load the clothes into the drum and
close the door.
global_main.book.book Page 26 Monday, August 17, 2020 8:48 AM
27
OPERATION
ENGLISH
NOTE
Do not put tablets into the dispenser.
Adding Water Softener
A water softener, such as anti-limescale
can be used to cut down on the use of
detergent in areas with high water
hardness level.
First add detergent, and then the
water softener. Dispense according to
the amount specified on the
packaging.
global_main.book.book Page 27 Monday, August 17, 2020 8:48 AM
28
OPERATION
Programme Table
Washing Programme
Cotton 40 (Cold to 95 ℃) Max. Load: Rating
Description Washes normally soiled clothes by combining various drum motions.
Pressing the
Start/Pause
button without selecting a programme
will cause the
Cotton
programme to begin immediately, using the
default settings.
Eco 40-60 40 (40 to 60 ℃) Max. Load: Rating
Description Washes normally soiled cotton clothes declared to be washable at 40
or 60 .
Mixed Fabric 40 (Cold to 60 ℃) Max. Load 4 kg
Description Washes mixed fabrics simultaneously.
Use for various kind of fabrics except special garments (silk/
delicate, sports wear, dark clothes, wool, duvet/curtains).
Easy Care 40 (Cold to 60 ℃) Max. Load 4 kg
Description Washes clothes that do not need ironing after washing.
Use for Polyamide, acrylic, polyester.
Silent Wash 40 (Cold to 60 ℃) Max. Load 5 kg
Description Washes clothes with less noise and vibration than other washing
programmes.
Use for lightly soiled white cotton (underwear).
Hygiene 60 Max. Load 4 kg
Description Washes clothes at a high temperature.
Baby Care 60 Max. Load 4 kg
Description Washes baby clothes with gentle motion and better performance.
global_main.book.book Page 28 Monday, August 17, 2020 8:48 AM
29
OPERATION
ENGLISH
NOTE
The test results depend on water pressure, water hardness, water inlet
temperature, room temperature, type and amount of load, degree of soiling
utilized detergent, fluctuations in the main electricity supply and chosen additional
options.
Select the appropriate water temperature for chosen wash programme. Always
follow garment manufacturer’s care label or instructions when washing to avoid
damage to clothes.
Delicates 20 (Cold to 40 ℃) Max. Load 3 kg
Description Washes machine-washable lingerie, sheer and lacy clothes.
Hand/Wool 30 (Cold to 40 ℃) Max. Load 2 kg
Description Washes hand-washable and machine-washable delicate clothes such
as washable wool, lingerie, dresses etc.
Use detergent for machine washable woolens
Sportswear 40 (Cold to 40 ℃) Max. Load 3 kg
Description Washes special garments like sports and outdoor wear.
Use for water-repellent fabric laminate used on clothing.
Speed 14 20 (20 to 40 ℃) Max. Load 2 kg
Description Washes small loads of lightly soiled clothes for approximately 14
minutes.
Duvet Cold (Cold to 40 ℃) Max. Load 2.5 kg (1
down duvet)
Description Washes large items such as bed covers, pillows, sofa covers, etc.
Tub Clean - -
Description This function helps clean the inside of your appliance's tub.
Rinse+Spin -Max. Load: Rating
Description Rinses and spins clothes. Use fabric softener if needed.
global_main.book.book Page 29 Monday, August 17, 2020 8:48 AM
30
OPERATION
NOTE
Select the proper wash temperature and spin speed for the desired programmes.
Actual water temperature may differ from the declared cycle temperature.
Neutral detergent is recommended.
Extra Options
NOTE
Rinse+
,
Delay End
and
Add Item
options can be selected for every washing
programme in this table.
Programme Intensive Pre Wash
Cotton
##
Eco 40-60
##
Mixed Fabric
##
Easy Care
##
Silent Wash
#
Hygiene
#
Baby Care
#
Delicates
#
Hand/Wool
#
Sportswear
#
Speed 14
Duvet
#
global_main.book.book Page 30 Monday, August 17, 2020 8:48 AM
31
OPERATION
ENGLISH
Selectable Maximum Spin Speed
NOTE
Actual maximum spin speed may vary depending on the load conditions. The
values above are rounded to the nearest hundred.
Consumption Data
Unit Description
Programme Spin Speed
Default Available
Cotton
1400 rpm All
Eco 40-60
1400 rpm All
Mixed Fabric
1000 rpm
All
Easy Care
1400 rpm All
Silent Wash
800 rpm
Up to 1000 rpm
Hygiene
1400 rpm All
Baby Care
1000 rpm Up to 1000 rpm
Delicates
800 rpm Up to 800 rpm
Hand/Wool
800 rpm Up to 800 rpm
Sportswear
800 rpm Up to 800 rpm
Speed 14
400 rpm All
Duvet
1000 rpm Up to 1000 rpm
kg
: Laundry load
h:mm
: Programme duration
kWh
: Energy consumption
: Maximum temperature inside the
treated textile
Litres
: Water consumption
rpm
: Maximum spin speed
%
: Remaining moisture at the end of spinning phase. The higher is the spin speed,
the higher is the noise and the lower is the remaining moisture.
global_main.book.book Page 31 Monday, August 17, 2020 8:48 AM
34
OPERATION
Extra Options and
Functions
You can use the extra options and
functions to customize the programmes.
Customizing a Washing
Programme
Each programme has default settings
that are selected automatically. You may
also customize these settings using
these buttons.
Temp.
This button selects the wash
temperature for the selected
programme.
Press the
Temp.
button until the
desired setting is lit.
Select the water temperature suitable
for the type of load you are washing.
Follow the garment fabric care labels
for best results.
Spin
The spin intensity level can be selected
by pressing this button repeatedly.
Press the
Spin
button to select spin
speed.
NOTE
If
No
is selected by pressing the
Spin
button, it will still rotate for a short
time to drain quickly.
Rinse+
This function is recommended for
people with detergent allergies.
Press the
Rinse+
button for adding
rinse once.
Intensive
This function is used to wash normal and
heavily soiled clothes.
Press the
Intensive
button.
Follow the next steps to customize a
washing programme:
1
Prepare the clothes and load the
drum.
2
Press the
Power
button.
3
Add detergent.
4
Select a washing programme.
5
Customize the washing programme
(
Temp.
,
Spin
,
Rinse+
and
Intensive
)
as necessary.
6
Press the
Start/Pause
button.
Only Using a Spin Function
1
Prepare the clothes and load the
drum.
2
Press the
Power
button.
Do not select a washing
programme and do not add a
detergent.
3
Press the
Spin
button.
4
Press the
Start/Pause
button.
NOTE
If you select the washing programme,
you will be unable to select a spin only.
global_main.book.book Page 34 Monday, August 17, 2020 8:48 AM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG FAV309WNE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG FAV309WNE in the language / languages: English as an attachment in your email.

The manual is 7.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info