815884
22
Zoom out
Zoom in
Previous page
1/72
Next page
22
INSTALLATION
Connecting the Water Supply Hose
Note for Connection
Water pressure must be between
50
kPa
and
800 kPa
(0.58.0 kgf/cm²). If
the water pressure is more than
800
kPa
, a decompression device should
be installed.
Periodically check the condition of the
water supply hose and replace the
water supply hose if necessary.
NOTE
Do not overtighten the water supply
hose or use mechanical devices to
tighten onto the inlet valves.
No further backflow protection
required for connection to the water
inlet.
Checking the Rubber Seal
Two rubber seals
A
are supplied with
the water supply hose. They are used to
prevent water leaks. Connection to taps
is sufficiently tight.
Do not use mechanical devices such as
multi grips to tighten the water supply
hose. Ensure that the curved end of
the water supply hose is connected to
the appliance.
Connecting the Hose to the
Water Tap
Connecting Screw-Type Hose to Tap
with Thread
Screw the supply hose connector onto
the water supply tap. Hand tighten only
with the aid of a soft cloth. Do not
overtighten the supply hose with any
mechanical device.
NOTE
After connecting the water inlet hose
to the water tap, turn on the water tap
global_main.book.book Page 22 Sunday, October 16, 2022 4:36 PM
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG F4V709STSA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG F4V709STSA in the language / languages: English as an attachment in your email.

The manual is 6.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info