97741
32
Zoom out
Zoom in
Previous page
1/40
Next page
RS-232C
32
Instellen Extern Controle Toestel
01. Power (Commando:ka)
Controleer Power Aan/Uit van de Projector.
T
ransmissie
Data 0 : Uitschakelen
1 : Power Ingeschakeld
[k] [a] [ ] [Set ID] [ ] [Data] [Cr]
[k] [a] [ ] [Set ID] [ ] [FF] [Cr]
[a] [ ] [Set ID] [ ] [OK] [Data] [x]
[a] [ ] [Set ID] [ ] [OK] [Data] [x]
Erkenning
Erkenning
Data 0 : Uitschakelen
1 : Power Ingeschakeld
Toon Power Aan/Uit status.
T
ransmissie
Data 0 : Uitschakelen
1 : Power Ingeschakeld
* Op dezelfde manier zenden andere functies 0xFF egevens
gebaseerd op dit formaat uit, Erkenning data feedback toont
status over elke functie.
02. Selecteer Invoer
(Commando:kb)
Selecteer de inputbron voor de Set.
T
ransmissie
Data 2 : Video 3 : S-Video 4 : Component
7 : RGB 9 : DVI
Data 2 : Video 3 : S-Video 4 : Component
7 : RGB 9 : DVI
[k] [b] [ ] [Set ID] [ ] [Data] [Cr]
[b] [ ] [Set ID] [ ] [OK] [Data] [x]
Erkenning
03. Aspect verhouding
(Commando:kc)
Pas schermformaat aan.
T
ransmissie
Data 1 : 4:3
2 : 16:9
Data 1 : 4:3
2 : 16:9
[k] [c] [ ] [Set ID] [ ] [Data] [Cr]
[c] [ ] [Set ID] [ ] [OK] [Data] [x]
Erkenning
1. Transmissie
*
[Commando 1] : Eerste commando om de set te besturen (k, j, x, ASCII code, 1 karakter)
*
[Commando 2] : Tweede commando om de set te besturen (ASCII code, 1 Karakter)
*
[Set ID] : U kunt de set ID aanpassen om het gewenste projector ID nummer in een speciaal menu te kiezen. Zie
vorige bladzijde Aanpassingsbereik is 1-99. Bij selecteren van Set ID 0wordt iedere aangesloten projector
gecontroleerd.
*
[DATA] : Commanda gegevens uitzenden. Zend 2 karakter uit indien ASCII code is georganiseerd.
* FFgegevens uitzenden om commando status te lezen.
*
[Cr] : Slede Terugkeren
ASCII code 0x0D
*
[ ] : ASCII code karakter komt overeen met Spatiebalkom commando, set ID en data te klassificeren.
[Commando1][Commando2][ ][Set ID][ ][Data][Cr]
* De Projectort zendt ACK (erkenning) uit gebaseerd op dit formaat tijdens het ontvangen van normale gegevens. Op dit
moment is data in data lees modus, geeft dit de huidige status data weer. Als de data, data schrijf modus is, wordt de data
terug gekeerd naar de PC.
[Commando2] [ ] [Set ID] [ ] [OK] [Data] [x]
[Commando2] [ ] [Set ID] [ ] [NG] [Data] [x]
3. Fout Erkenning
2. OK Erkenning
* De Projector zendt ACK (erkenning) uit gebaseerd op dit formaat tijdens het ontvangen van abnormale gegevens van niet
geldige.
Data : [1] : Illegale code(Dit commando wordt niet ondersteund.)
[2] : Niet ondersteunde functie(Deze functie werkt niet)
[3] : Wacht(Probeer over een paar minuten)
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG DX540-JD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG DX540-JD in the language / languages: Dutch as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info