537866
57
Zoom out
Zoom in
Previous page
1/73
Next page
57
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
- Make sure you have properly connected the projector to peripheral equipment as described on pages
(see page19-21).
- Make sure all equipment is connected to AC outlet and the power is turned on.
- When the projector does not project an image from the connected computer, restart the computer.
Failure Solutions
The projector can't be powered on. - Plug the power cord of the projector into the AC power outlet.
- Check whether the power indicator turns red.
- The projector can be turned on after the power indicator turns
red.
- Check the POWER/TEMP indicator. If it lights red, projector
cannot be turned on.
- Check the projection lamp
The initial display is not shown. - Make sure both "Display" and "Logo select" functions
are enabled.
Input signals are automatically
switched.
-Adjust the search function of input source properly.
Input signal switches automatically. - Make sure Input search function is adjusted properly.
When the projector is on,
the lter warning icon appears.
- Clean the lter immediately.
When the projector is on, the lamp
replacement icon appears.
- Replace the lamp immediately.
Image is out of focus. - Adjust focus of the projector.
- Provide proper distance between the projector and the
projection screen.
- Check the projection lens to see if it needs cleaning.
Image turns over leftward/rightward
Image turns over upward/downward
- Check the function of "Rear" and adjust the image.
- Check the function of "ceiling" and adjust the image.
Image not bright enough - Check whether the "Contrast" or "Brightness" is adjusted
correctly.
- Check whether the "Image mode" is properly selected.
- Check the function of the "Lamp Mode".
- Check the lamp and replace it.
There is no image. - Check the connection between your computer or video
equipment and the projector.
- Make sure the temperature is not out of the specied Operating
Temperature (41˚F–95˚F [5˚C–35˚C]).
- When BLANK is operating, the image cannot be displayed.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG BD450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG BD450 in the language / languages: English as an attachment in your email.

The manual is 11,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info