576507
12
Zoom out
Zoom in
Previous page
1/30
Next page
www.lg.com
Please read this manual carefully before operating your set
and retain it for future reference.
MT55*
OWNER’S MANUAL
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.
TABLE OF CONTENTS
2
ENG
ENGLISH
TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE
NOTICE
4 ASSEMBLING AND PREPARING
4 Unpacking
6 Parts and buttons
7 Lifting and moving the TV
7 Setting up the TV
7 - Attaching the Stand
9 Mounting on a table
11 Mounting on a wall
13 MAKING CONNECTIONS
13 Antenna connection
14 Satellite dish connection
14 Euro Scart connection
15 Other connections
17 - Connecting to a PC
18 REMOTE CONTROL
19 NETWORK SETTING
19 Wired Network Connection
20 SETTINGS
24 TO SEE WEB MANUAL
25 MAINTENANCE
25 Cleaning your TV
25 - Screen, frame, cabinet and stand
25 - Power cord
25 Preventing “Image burn” or “Burn-in” on your
TV screen
WARNING
y
If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
CAUTION
y
If you ignore the caution message, you may be
slightly injured or the product may be damaged.
NOTE
y
The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
26 TROUBLESHOOTING
27 SPECIFICATIONS
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
ENGENGLISH
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and
other countries.
ABOUT DIVX VIDEO: DivX
®
is a digital video format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an ofcial DivX Certied
®
device that has passed rigorous
testing to verify that it plays DivX video. Visit divx.com for more information and software
tools to convert your les into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied
®
device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registra-
tion code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com
for more information on how to complete your registration.
“DivX Certied
®
to play DivX
®
video up to HD 1080p, including premium content.”
“DivX
®
, DivX Certied
®
and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
This offer is valid for three (3) years from the date on which you purchased the product.
ASSEMBLING AND PREPARING
4
ENG
ENGLISH
NOTE
y
Image shown may differ from your TV.
y
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y
The available menus and options may differ from the input source or product model that you are using.
y
New features may be added to this TV in the future.
y
The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
y
The energy consumed during use can be significantly reduced if the level of brightness of the picture is
reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where
you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
y
Do not use any unapproved items to ensure the safety and product life span.
y
Any damage or injuries caused by using unapproved items are not covered by the warranty.
y
Some models have a thin film attached on to the screen and this must not be removed.
NOTE
y
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to upgrade of
product functions.
y
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18
mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit
into your TV’s USB port.
A
B
A
B
*A
<
=
10 mm
*B
<
=
18 mm
ENGENGLISH
ASSEMBLING AND PREPARING
5
Remote control,
batteries (AAA)
(See p.18)
CD (Owner's Manual),
Cards
Stand Base
(See p.7)
Power Cord
(See p.9)
AC-DC Adaptor
(See p.9)
AC-DC Adaptor
(Depending on model)
(See p.9)
Stand Body
(See p.7)
RGB Cable
(See p.16)
or
(Depending on model)
ASSEMBLING AND PREPARING
6
ENG
ENGLISH
Parts and buttons
Touch Buttons
Screen
Power Indicator
y
Red : When the power is turned off
y
Off : When the power is turned on
y
Amber : When the power is in
power saving mode
Remote Control Sensor
Speakers
NOTE
y
All of the buttons are touch sensitive and can be operated through simple touch with your finger.
y
You can set the power indicator light to on or off by selecting OPTION in the main menus.
Touch button Description
Scrolls through the saved programmes.
Adjusts the volume level.
OK
Selects the highlighted menu option or conrms an input.
SETTINGS Accesses the main menus, or saves your input and exits the menus.
INPUT Changes the input source.
Turns the power on or off.
ENGENGLISH
ASSEMBLING AND PREPARING
7
Lifting and moving the TV
Please note the following advice to prevent the TV from
being scratched or damaged and for safe transportation
regardless of its type and size.
CAUTION
y
Avoid touching the screen at all times, as this
may result in damage to the screen.
y
It is recommended to move the TV in the box or
packing material that the TV originally came in.
y
Before moving or lifting the TV, disconnect the
power cord and all cables.
y
When holding the TV, the screen should face
away from you to avoid damage.
y
Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
y
When transporting the TV, do not expose the
TV to jolts or excessive vibration.
y
When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
y
Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
Setting up the TV
Image shown may differ from your TV.
Attaching the Stand
1
2
Stand Body
Stand Base
or
ASSEMBLING AND PREPARING
8
ENG
ENGLISH
CAUTION
y
Do not carry the TV upside-down by holding the
stand body (or stand base) as this may cause it
to fall off, resulting in damage or injury.
y
The illustration shows a general example of
installation and may look different from the actual
product.
3
CAUTION
y
When attaching the stand to the TV set, place
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
NOTE
y
Remove the stand before installing the TV on a
wall mount by performing the stand attachment
in reverse.
ENGENGLISH
ASSEMBLING AND PREPARING
9
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the
AC-DC Adapter
and
Power Cord
to a
wall outlet.
DC-IN
or
DC-IN
AC-DC Adapter
AC-DC Adapter
CAUTION
OK
NG
NG
OK
OK
NG
NG
OK
OK
NG
NG
OK
OK
NG
NG
OK
ASSEMBLING AND PREPARING
10
ENG
ENGLISH
Using the Kensington security system
(This not available for all models.)
y
Image shown may differ from your TV.
The Kensington security system connector is located at
the rear of the TV. For more information of installation
and using, refer to the manual provided with the Ken-
sington security system or visit
http://www.kensington.
com.
Connect the Kensington security system cable between
the TV and a table.
NOTE
y
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
CAUTION
y
Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
y
Please be sure to connect the TV to the AC-
DC power adapter before connecting the TV’s
power plug to a wall power outlet.
Adjusting the angle of the TV to suit view
y
Image shown may differ from your TV.
Tilt from +20 to -5 degrees up or down to adjust the
angle of the TV to suit your view.
Front
Rear
+20-5
CAUTION
y
When you adjust the angle, do not hold the
buttom of the TV frame as shown on the
following illustration, as may injure your fingers.
ENGENGLISH
11
ASSEMBLING AND PREPARING
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed installation
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
10 cm
10 cm
If you intend to mount the TV to a wall, attach Wall
mounting interface (optional parts) to the back of the
TV.
When you install the TV using the wall mounting
interface (optional parts), attach it carefully so it will not
drop.
1 If you use screw longer than standard, the TV
might be damaged internally.
2 If you use improper screw, the product might be
damaged and drop from mounted position. In this
case, LG Electronics is not responsible for it.
Separate purchase(Wall Mounting Bracket)
Model
Wall Mount (A x B)
100 x 100
Standard screw
M4 x L10
Number of screws
4
Wall mount bracket
RW120
y
Wall Mount (A x B)
A
B
ASSEMBLING AND PREPARING
12
ENG
ENGLISH
CAUTION
y
Disconnect the power first, and then move or
install the TV. Otherwise electric shock may
occur.
y
If you install the TV on a ceiling or slanted wall,
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel.
y
Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
y
Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the manufacturers warranty.
y
Screw length from outer surface of back cover
should be under 8mm.
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Wall mount Pad
Back Cover
Max.8mm
NOTE
y
Use the screws that are listed on the VESA
standard screw specifications.
y
The wall mount kit includes an installation
manual and necessary parts.
y
The wall mount bracket is not provided. You can
obtain additional accessories from your local
dealer.
y
The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
y
For more information, refer to the manual
supplied with the wall mount.
ENGENGLISH
MAKING CONNECTIONS
13
MAKING CONNECTIONS
This section on
MAKING CONNECTIONS
mainly uses diagrams for the MT55D models.
Connect various external devices to the TV and switch
input modes to select an external device. For more
information of external device’s connection, refer to the
manual provided with each device.
Available external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices.
NOTE
y
The external device connection may differ from
the model.
y
Connect external devices to the TV regardless
of the order of the TV port.
y
If you record a TV programme on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a DVD
recorder or VCR. For more information of
recording, refer to the manual provided with the
connected device.
y
Refer to the external equipment’s manual for
operating instructions.
y
If you connect a gaming device to the TV, use
the cable supplied with the gaming device.
y
In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture
is clear.
y
In PC mode, some resolution settings may not
work properly depending on the graphics card.
Antenna connection
ANTENNA
/ CABLE IN
(Not Provided)
Connect the TV to a wall antenna socket with an RF
cable (75 ).
NOTE
y
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal
amplifier properly to improve the image quality.
y
If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
y
An antenna cable and converter are not
supplied.
y
Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
MAKING CONNECTIONS
14
ENG
ENGLISH
Euro Scart connection
AV1
(Not Provided)
Transmits the video and audio signals from an
external device to the TV set. Connect the external de-
vice and the TV set with the euro scart cable as shown.
Output Type
Current
input mode
AV1
(TV Out
1
)
Digital TV Digital TV
Analogue TV
Analogue TV
Component, AV, HDMI,
RGB
1 TV Out : Outputs Analogue TV or Digital TV
signals.
NOTE
y
Any Euro scart cable used must be signal
shielded.
Satellite dish connection
(Only satellite models)
(Not Provided)
Connect the TV to a satellite dish to a satellite socket
with a satellite RF cable (75Ω).
ENGENGLISH
MAKING CONNECTIONS
15
Other connections
Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV
with the HDMI cable as shown. Some separate cable is not provided.
HDMI OUT
AV2 IN
COMPONENT IN
AV2 IN
COMPONENT IN
AV 1
(MONO)
L
R
AV2 IN
COMPONENT IN
R
700 mA Max
13/18 V
LNB IN
VIDEO
AUDIO
VIDEO
AUDIO
VIDEO
AUDIO
VIDEO
AUDIO
DVD / Blu-Ray / HD Cable Box /
HD STB / PC
(Only LAN PORT
models)
DVD / Blu-Ray / HD Cable Box
DVD / Blu-Ray / HD Cable Box / VCR
GREEN
BLUE
RED
WHITE
RED
GREEN
BLUE
RED
WHITE
RED
YELLOW
WHITE
RED
YELLOW
WHITE
RED
(Only satellite models)
MAKING CONNECTIONS
16
ENG
ENGLISH
PC
RGB OUT(PC)
AUDIO
IN
(PC)
USB IN
5 V 0.5A
PCMCIA
CARD SLOT
RGB IN (PC)
DVI
OUT
AUDIO OUT
H / P
AUDIO OUT
USB / HDD
1
Headphone
DVD / Blu-Ray / HD Cable Box / PC
1 USB port supports 0.5 A electric current.
If you need more electric current in case of HDD, use the separate power adaptor.
ENGENGLISH
MAKING CONNECTIONS
17
Connecting to a PC
Your TV supports the Plug & Play* feature and has the built-in speakers with Virtual Surround that reproduces sound
clearly with a rich bass.
* Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, with-
out device conguration or user intervention.
y
If you want to use HDMI-PC mode, you must set the Input Label to PC mode.
y
The OSD (On Screen Display) is displayed on the screen as shown below.
»
When turning the product on in HDMI input.
»
When switching to HDMI input.
Is the input connected to your PC?
Do not show message again.
Yes No
y
If you select "Yes" the size and image quality are optimised for your PC.
y
If you select "No" the size and image quality are optimised for the AV device (DVD player, set-top box).
y
If you select "Do not show message again" this message does not appear until the TV is reset. You can
change the set value in SETTINGS INPUT Input Label.
y
The values set for HDMI1/HDMI2 are saved independently.
NOTE
REMOTE CONTROL
18
ENG
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this
manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and
close the battery cover. To remove the batteries, perform the installation actions in reverse.
CAUTION
y
Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
(POWER) Turns the TV on or off.
TV/RAD
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
AD By pressing the AD button, audio descriptions function will be enabled.
PIP/
Turns the PIP mode on or off. (Depending on model)
TV/PC Selects TV or PC mode.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV Accesses your favourite programme list.
GUIDE Shows programme guide.
MUTE
Mutes all sounds.
Adjusts the volume level.
P
Scrolls through the saved programmes
PAGE Moves to the previous or next screen.
Teletext buttons(
TEXT / T.OPT) These buttons are used for teletext.
INFO
Views the information of the current programme and screen.
SETTINGS Accesses the main menus.
Q. MENU Accesses the quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK
Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears all on-screen displays and returns to TV viewing.
Accesses the AV devices connected with the HDMI cable through
HDMI-CEC. Opens the SIMPLINK menu.
Starts to record and displays record menu. (Depending on model)
Control buttons (
) Controls the MY MEDIA menus, or the
SIMPLINK compatible devices (USB,SIMPLINK).
Colour buttons These access special functions in some menus.
(
: Red, : Green, : Yellow, : Blue)
(Backlight) Adjusts the brightness of the screen by controlling the screen
backlight.
NOTE
y
On MHEG programme, you cannot adjust the backlight with the yellow or blue key.
ENGENGLISH
NETWORK SETTING
19
1 Press the
SETTINGS
button to access the main
menu.
2 Select the
NETWORK
Network Setting
menu.
NETWORK
Network Setting
Move OK
Network Status
3 Select the
Start Connection
.
Connect a LAN cable to the back of TV.
Setting your network will enable network-related features on the TV.
Previous
Network Setting
Start Connection
Next
NETWORK SETTING
(Only LAN PORT models)
Image shown may differ from your TV.
Wired Network Connection
1 2 3 4
LAN
LAN
(Not Provided)
4 The device automatically tries to connect to the
network.
Previous
Network connecting...
Network Setting
Cancel
5 The connected network is displayed. Select the
Complete
to confirm the network connection.
Network Setting
For detailed settings, select [Set Expert].
Previous
Wired network is connected.
CompleteSet Expert
SETTINGS
20
ENG
ENGLISH
SETTINGS
Automatically Setting Up Programme
SETTINGS SETUP Auto Tuning
Automatically tunes the programmes.
y
If Input Source is not connected properly,
programme registration may not work.
y
Auto Tuning
only finds programmes that are
currently broadcasting.
y
If
Lock System
is turned on, a pop-up window
will appear asking for password.
To adjust picture with Picture Wizard
SETTINGS PICTURE Picture Wizard III
[Depending on model]
Calibrates and adjusts for optimum picture quality us-
ing the remote control and the Picture Wizard without
expensive pattern devices or help from a specialist.
To select Picture Mode
SETTINGS PICTURE Picture Mode
Select the picture mode optimized for the viewing
environment or the programme.
y
Vivid
: Heightens contrast, brightness and
sharpness to display vivid images.
y
Standard
: Displays images in standard levels
of contrast, brightness and sharpness.
y
Eco/APS
: [Depending on model]
The Energy Saver feature changes settings
on the TV to reduce power consumption.
y
Cinema/Game
: Displays the optimum picture
for movie, game.
y
Sport
: Optimizes the video image for high
and dynamic actions by emphasizing primary
colours such as white, grass, or sky blue.
y
Expert 1, 2
: Menu for adjusting picture
quality that allows experts and amateurs
to enjoy the best TV viewing. This is the
adjustment menu provided for ISF-certified
picture tuning professionals. (ISF logo can
only be used on ISF-certified TVs.)
ISFccc: Imaging Science Foundation Certified
Calibration Control
y
Depending on input signal, available range of
picture modes may differ.
y
Expert mode is for picture tuning
professionals to control and fine-tune using a
specific image. For normal images, the effects
may not be dramatic.
y
The ISF function is only available on some
models.
To set advanced control
SETTINGS PICTURE Picture Mode
Advanced Control / Expert Control
Calibrates the screen for each picture mode; or adjusts
picture settings for a special screen. First select a Pic-
ture Mode of your choice.
y
Dynamic Contrast
: Adjusts the contrast to the
optimal level according to the brightness of the
image.
y
Dynamic Colour
: Adjusts colours to make the
image appear in more natural colours.
y
Skin Colour
: Sets Skin colour spectrum
separately to implement the skin colour as
defined by the user.
y
Sky Colour
: Sky colour is set separately.
y
Grass Colour
: Natural colour spectrum
(meadows, hills, etc.) can be separately set.
y
Gamma
: Sets the gradation curve according to
the output of picture signal in relation to the input
signal.
y
Colour Gamut
: Selects the range of colours
that can be expressed.
y
Edge Enhancer
: Shows clearer and distinctive
yet natural edges of the video.
y
Expert Pattern
: [Depending on model]
Patterns used for expert adjustment.
y
Colour Filter
: Filters a specific colour spectrum
in RGB colours to fine-tune colour saturation and
hue accurately.
y
Colour Temperature
: Adjusts the overall tone of
the screen as desired. In Expert mode, detailed
fine-tuning can be set via Gamma method, etc.
y
Colour Management System
: This is a system
that experts use when they adjust colour with
a test pattern. They can select from six colour
areas (Red / Green / Blue / Cyan / Magenta
/ Yellow) without affecting other colours. For
normal images, adjustments may not result in
noticeable colour changes.
y
Depending on input signal or other picture
settings, the range of detailed items for
adjustment may differ.
ENGENGLISH
SETTINGS
21
To set additional picture options
SETTINGS PICTURE Picture Mode
Picture Option
[Depending on model]
Adjusts detailed setting for images.
y
Noise Reduction
: Eliminates noise in the
picture.
y
MPEG Noise Reduction
: Eliminates noise
generated while creating digital picture signals.
y
Black Level
: Adjusts the brightness and
contrast of the screen to suit the black level of
the input picture by using the blackness (black
level) of the screen.
y
Real Cinema
: Optimizes the screen for movie
viewing.
y
Motion Eye Care
/
SUPER Energy Saving
:
[Depending on model]
Saves power consumption by adjusting the
brightness corresponding to the movement of
the image on the screen.
y
Depending on input signal or other picture
settings, the range of detailed items for
adjustment may differ.
To use TruMotion
SETTINGS PICTURE TruMotion
[Depending on model]
Corrects images to display smoother motion sequences.
y
Smooth :
De-judder/De-blur working on higher
range in auto mode.
y
Clear :
De-judder/De-blur working on middle
range in auto mode.
y
User :
De-judder / De-blur can be set manually.
De-judder: This function adjusts juddering of
the screen.
De-blur: This function adjusts and eliminates
blurring of the screen.
Auto means Juddering and blurring range that
depend on input video status is controlled by
TruMotion mode.
To use Energy Saving feature
SETTINGS PICTURE Energy Saving
Reduces power consumption by adjusting screen
brightness.
y
Auto
: [Depending on model]
The TV sensor detects the ambient lighting and
automatically adjusts the screen brightness.
y
Off
: Turns off the Energy Saving mode.
y
Minimum / Medium / Maximum
: Applies the
pre-set Energy Saving mode.
y
Screen Off
: Screen is turned off and only
sound is played. Press any button except
Power button on the remote control to turn the
screen back on.
To use TV speaker
SETTINGS AUDIO Sound Out TV Speaker
[Depending on model]
Sound is output through the TV speaker.
To use External Speaker
SETTINGS AUDIO Sound Out
External Speaker (Optical)
[Depending on model]
Sound is output through the speaker connected to the
optical port.
y
SimpLink is supported.
To use Digital Sound Out
SETTINGS AUDIO Sound Out
External Speaker (Optical) Digital Sound Out
[Depending on model]
Sets up Digital Sound Out.
Item Audio Input
Digital Audio
Ouput
Auto
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
Dolby Digital
PCM All PCM
To connect and use LG audio device
SETTINGS AUDIO Sound Out
LG Sound Sync (Optical)
[Depending on model]
Connect LG audio device with the logo to the opti-
cal digital audio output port. LG audio device allows you
to enjoy rich powerful sound easily.
To use Headphone
SETTINGS AUDIO Sound Out Headphone
[Depending on model]
Sound is output through the headphone connected to
the earphone/headphone port.
SETTINGS
22
ENG
ENGLISH
To synchronize audio and video
SETTINGS AUDIO AV Sync. Adjust
[Depending on model]
Synchronizes video and audio directly when they do
not match.
y
If you set
AV Sync. Adjust
to
ON
, you can
adjust the sound output (TV speakers or
SPDIF) to the screen image.
To use SIMPLINK
[Depending on model]
SIMPLINK is a feature that enables you to control and
manage various multimedia devices conveniently via
the SIMPLINK menu.
1 Connect the TV’s
HDMI IN
terminal and the
SIMPLINK device’s HDMI output terminal using an
HDMI cable.
y
[Depending on model]
For home theatre units with a SIMPLINK
function, connect HDMI terminals as above,
and use an optical cable to connect Optical
Digital Audio Out from the TV to Optical Digital
Audio In of the SIMPLINK device.
2 Select
INPUT(OPTION)
SIMPLINK
.
SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK
function to
ON
.
4 In SIMPLINK menu window, selects the device you
want to control.
y
This function is only compatible with devices
with the SIMPLINK logo.
y
To use the SIMPLINK function, you need to
use a high-speed HDMI
®
cable (with CEC
(Consumer Electronics Control) feature added).
High-speed HDMI
®
cables have the No. 13 pin
connected for information exchange between
devices.
y
If you switch to another input, the SIMPLINK
device will stop.
y
If a third-party device with the HDMI-CEC
function is also used, the SIMPLINK device
may not work normally.
y
[Depending on model]
If you select or play media from a the
device with a home theatre function, the
HT
Speaker(Speaker)
is automatically connected.
Be sure to connect with an optical cable (sold
separately) to use the
HT Speaker(Speaker)
function.
SIMPLINK function description
y
Direct Play
: Plays the multimedia device on
the TV instantly.
y
Select multimedia device
: Selects the desired
device via the SIMPLINK menu to control it
from the TV screen instantly.
y
Disc playback
: Manages the multimedia
device with the TV remote control.
y
Power off all devices
: When you power off
the TV, all connected devices are turned off.
y
Sync Power on
: When the equipment with
SIMPLINK function connected HDMI terminal
starts to play, the TV will automatically turn on.
y
Speaker
: [Depending on model]
Select speaker either on the home theatre unit
or the TV.
To set password
SETTINGS LOCK Set Password
Sets or changes the TV password.
The initial password is set to ‘0000’.
When France is selected for Country, password is not
‘0000’ but ‘1234’.
When France is selected for Country, password cannot
be set to ‘0000’.
To return Factory Reset
SETTINGS OPTION Factory Reset
All stored information is deleted and TV settings are
reset.
The TV turns itself off and back on, and all settings are
reset.
y
When
Lock System
is in place, a pop-up
window appears and asks for password
y
Do not turn off the power during initialization.
To remove the USB device
Q.MENU USB Device
Select a USB storage device that you want to remove.
When you see a message that the USB device has
been removed, separate the device from the TV.
y
Once a USB device has been selected for
removal, it can no longer be read. Remove the
USB storage device and then re-connect it.
ENGENGLISH
SETTINGS
23
Using a USB storage device - warning
y
If the USB storage device has a built-in auto
recognition program or uses its own driver, it
may not work.
y
Some USB storage devices may not work or
may work incorrectly.
y
Use only USB storage devices formatted with
the Windows FAT32 or NTFS File System.
y
For external USB HDDs, it is recommended
that you use devices with a rated voltage of
less than 5 V and a rated current of less than
500 mA.
y
It is recommended that you use USB memory
sticks of 32 GB or less and USB HDDs of 1 TB
or less.
y
If a USB HDD with power-saving function does
not work properly, turn the power off and on.
For more information, refer to the user manual
of the USB HDD.
y
Data in the USB storage device can be
damaged, so be sure to back up important
files to other devices. Data maintenance is the
users responsibility and the manufacturer is
not responsible for data loss.
My Media supporting file
y
Maximum data transfer rate : 20 Mbps (Mega
bit per second)
y
External supported subtitle formats
: *.srt (SubRip), *.smi (SAMI), *.sub
(SubViewer, MicroDVD, DVDsubtitleSystem,
SubIdx(Vobsub)), *.ass/*.ssa (SubStation
Alpha), *.txt (TMplayer), *.psb (PowerDivX)
y
Internal supported subtitle formats: XSUB
(Supports internal subtitles generated from
DivX6)
Supported Video Formats
y
Maximum: 1920 x 1080 @ 30p (only Motion
JPEG 640 x 480 @ 30p)
y
.asf, .wmv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XViD, H.264/AVC,
VC1(WMV3, WVC1), MP43
[Audio] WMA Standard, WMA9(Pro), MP3,
AAC, AC3, MP3, 3D WMV Single Stream.
y
divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XViD, H.264/AVC [Audio]
HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I,
MPEG-1 Layer II, Dolby Digital, MPEG-1 Layer
III (MP3), *DTS
y
.ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, AVS, VC1
[Audio] MPEG-1 Layer I, MPEG-1 Layer II,
MPEG-1 Layer III (MP3), Dolby Digital, Dolby
Digital Plus, AAC, HE-AAC, *DTS
y
.vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, MPEG-
1 Layer II, DVD-LPCM
y
.mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XVID, H.264/AVC [Audio]
AAC, MPEG-1 Layer III (MP3), *DTS
y
.mkv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XVID, H.264/AVC [Audio]
HE-AAC, Dolby Digital, MPEG-1 Layer III
(MP3), *DTS, LPCM
y
motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM
y
.mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II,
Dolby Digital, LPCM
y
dat
[Video] MPEG-1, MPEG-2
[Audio] MP2
y
flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC
y
*rm, *rmvb
[Video] RV30, RV40
[Audio] Dolby Digital, AAC, HE-AAC,
RA6(Cook)
y
3gp, 3gp2
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)
y
*DTS / *rm / *rmvb : Depending on model
Supported Audio Formats
y
File type : mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 16 kHz - 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3
y
File Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS
y
File Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4
SETTINGS / TO SEE WEB MANUAL
24
ENG
ENGLISH
y
File Type : WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard
y
File Type : WMA
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA 10 Pro
y
File Type : OGG
[Bit rate] Free Format
[Sample freq.] 8kHz ~ 48 kHz
[Support] OGG Vorvis
Supported Photo Formats
y
Category : 2D (jpeg, jpg, jpe)
[Available file type] SOF0: Baseline,
SOF1: Extend Sequential,
SOF2: Progressive
[Photo size] Minimum: 64 x 64,
Maximum: Normal Type: 15360 (W) x 8640
(H), Progressive Type: 1920 (W) x 1440 (H)
y
Category : BMP
[Photo size] Minimum : 64 x 64, Maximum :
9600 x 6400
y
Category : PNG
[Available file type] Interlace, Non-Interlace
[Photo size] Minimum : 64 x 64, Maximum :
Interlace : 1200 x 800, Non-Interlace : 9600 x
6400
y
BMP and PNG format files may be slower to
display than JPEG.
TO SEE WEB MANUAL
To obtain detailed User Guide information,
please visit www.lg.com.
ENGENGLISH
MAINTENANCE
25
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
y
Make sure to turn the power off and disconnect the power cord and all other cables first.
y
When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to
prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
y
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
y
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent.
Then wipe immediately with a dry cloth.
CAUTION
y
Avoid touching the screen at all times, as this may result in damage to the screen.
y
Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
y
Do not use any chemicals as this may damage the product.
y
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
Preventing “Image burn” or “Burn-in” on your TV screen
y
If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a
permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.
y
If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed
area of the screen.
y
Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD) to prevent
image burn.
TROUBLESHOOTING
26
ENG
ENGLISH
TROUBLESHOOTING
Problem Solution
Cannot control the
TV with the remote
control.
y
Check the remote control sensor on the product and try again.
y
Check if there is any obstacle between the product and the remote control.
y
Check if the batteries are still working and properly installed ( to , to ).
No image display
and no sound is
produced.
y
Check if the product is turned on.
y
Check if the power cord is connected to a wall outlet.
y
Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
y
Check the power control settings. The power supply may be interrupted.
y
Check if the Automatic Standby (Depending on model) / Off Time / Sleep Timer
feature is activated in the TIME settings.
y
If there is no signal while the TV is on, the TV will turn off automatically after 15
minutes of inactivity.
When connecting to
the PC (HDMI/DVI/
RGB), ‘No signal’ or
‘Invalid Format’ is
displayed.
y
Turn the TV off/on using the remote control.
y
Reconnect the HDMI/RGB cable.
y
Restart the PC with the TV on.
ENGENGLISH
SPECIFICATIONS
27
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
MODELS
22MT55V
22MT55D
23MT55V
23MT55D
24MT55V
24MT55D
Dimensions
(W x H x D)
With stand (
mm
)
508.5 x 416.6 x 188.4 544 x 436.5 x 188.4 566.8 x 447.7 x 188.4
Without stand(
mm)
508.5 x 315 x 65.9 544 x 334.8 x 65.9 566.8 x 346.1 x 66.5
Weight With stand (kg)
3.4 3.7 3.9
Without stand (kg)
3.2 3.4 3.6
Power Consumption
30 W 33 W 33 W
Power requirement
19 V 1.6 A 19 V 2.0 A 19 V 1.6 A
AC/DC Adapter
Manufacturer : Lien Chang
Model : LCAP16B-E, LCAP21C
Manufacturer : Honor
Model : ADS-45FSN-19 19040GPG, ADS-45SN-19-3 19040G
In : AC 100 - 240 V ~ 50/60 Hz
Out : DC 19 V 2.1 A
MODELS
27MT55V
27MT55D
Dimensions
(W x H x D)
With stand (mm)
641.2 x 489.1 x 213.2
Without stand(mm)
641.2 x 391.3 x 77.8
Weight With stand (kg)
5.3
Without stand (kg)
4.88
Power Consumption
35 W
Power requirement
19 V 2.0 A
AC/DC Adapter
Manufacturer : Lien Chang
Model : LCAP16B-E,
LCAP21C
Manufacturer : Honor
Model : ADS-45FSN-19
19040GPG, ADS-
45SN-19-3 19040G
In : AC 100 - 240 V ~
50/60 Hz
Out : DC 19 V 2.1 A
SPECIFICATIONS
28
ENG
ENGLISH
CI Module Size(W x H x D) 100.0 mm x 55.0 mm x 5.0 mm
Environment
condition
Operating Temperature 10 °C to 35 °C
Operating Humidity 20 % to 80 %
Storage Temperature -10 °C to 60 °C
Storage Humidity 5 % to 90 %
Satellite Digital TV
Digital TV Analogue TV
Television System
DVB-T/T2
DVB-C
DVB-S/S2
DVB-T
DVB-C
PAL/SECAM B/G/I/D/K,
SECAM L/L
Programme Coverage
VHF, UHF
C-Band, Ku-Band
VHF, UHF
VHF: E2 to E12,
UHF: E21 to E69,
CATV: S1 to S20,
HYPER: S21 to S47
Maximum number of
storable programmes
6,000 1,500
External Antenna Impedance 75 Ω
RGB (PC) / HDMI (PC) supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 400
31.468 70.080
640 x 480
31.469
37.500
59.940
75.000
800 x 600
37.879
46.875
60.317
75.000
1024 x 768
48.363
60.023
60.004
75.029
1024 x 768
Only HDMI(PC)
56.476 70.069
1152 x 864
67.500 75.000
1280 x 720
45.000 60.000
1280 x 800
49.702 59.810
1280 x 1024
63.981
79.976
60.020
75.025
1400 x 1050
65.317 59.978
1440 x 900
55.935 59.887
1600 x 900
60.000 60.000
1680 x 1050
64.674
65.290
59.883
59.954
1920 x 1080
67.500 60.000
NOTE
y
The optimal display resolution is 1920 x
1080 @ 60 Hz. The optimal timing is vertical
frequency 60Hz in each mode.
HDMI-DTV supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 480
31.469
31.500
59.940
60.000
720 x 576
31.250 50.000
1280 x 720
37.500
44.960
45.000
50.000
59.940
60.000
1920 x 1080
33.720
33.750
28.125
27.000
33.750
56.250
67.430
67.500
59.940
60.000
50.000
24.000
30.000
50.000
59.940
60.000
ENGENGLISH
SPECIFICATIONS
29
Component supported mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
720 x 480 15.730
15.750
31.470
31.500
59.940
60.000
59.940
60.000
720 x 576 15.625
31.250
50.000
50.000
1280 x 720 37.500
44.960
45.000
50.000
59.940
60.000
1920 x 1080 33.720
33.750
28.125
56.250
67.430
67.500
59.940
60.000
50.000
50.000
59.940
60.000
Component port connecting information
Component ports on the TV Y P
B
P
R
Video output ports on DVD
player
Y P
B
P
R
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
Make sure to read the Safety Precautions
before using the product.
Keep the Owner’s Manual (CD) in an
accessible place for future reference.
The model and serial number of the TV
is located on the back and one side of
the TV. Record it below should you ever
need service.
MODEL
SERIAL
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LG 27MT55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LG 27MT55 in the language / languages: English as an attachment in your email.

The manual is 7,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of LG 27MT55

LG 27MT55 User Manual - German - 29 pages

LG 27MT55 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info