455712
55
Zoom out
Zoom in
Previous page
1/290
Next page
Wireless Setup menu
From here You can
Network Name View the current Service Set Identifier (SSID) being used.
An SSID is the name of a wireless local area network. You
cannot change this menu item.
Wireless Signal Quality Select a Wireless Signal Strength.
TCP/IP menu
Internet Protocol (IP) specifies the format of packets, also called datagrams, and the addressing scheme. Most
networks combine IP with a higher-level protocol called Transmission Control Protocol (TCP). TCP enables two hosts
to establish a connection and exchange streams of data. TCP guarantees delivery of data and also guarantees that
packets are delivered in the same order in which they were sent.
From here You can
Enable DHCP Specify Yes or No as the value. DHCP is Dynamic Host
Configuration Protocol. The network automatically
assigns a number for the network information.
Set IP Address Set the IP address manually.
Set IP Netmask Assign a subnet mask.
A subnet mask is used to separate an IP address into two
parts: an extended network address and a host address.
The subnet mask is written using the dotted decimal
notation and should contain 32 bits. Example:
255.255.255.0
Note: This option is disabled if Enable DHCP is
enabled.
Set IP Gateway Specify the IP address of another device on the same
network. This device acts as a router or access point to
other devices on another network.
General networking information
Assigning an IP address
An IP address may be assigned by the network using DHCP. The print object, created at the end of the installation,
sends all print jobs across the network to the printer using this address.
Many networks have the ability to automatically assign an IP address. Auto-IP is the ability for individual devices to
assign themselves a unique IP address. Most networks use DHCP to assign addresses.
During the Direct IP printing installation of printer software, the IP address is visible in the printer list only as it is
being assigned. The print object that is created in the Printers folder of the operating system will reference the MAC
address of the printer in the port name.
If the IP address is not automatically assigned, you can try manually entering an address after selecting your printer
from the available list.
Connecting the printer to a network
55
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark X 9575 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark X 9575 in the language / languages: English as an attachment in your email.

The manual is 3,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark X 9575

Lexmark X 9575 User Manual - Dutch - 298 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info