455783
113
Zoom out
Zoom in
Previous page
1/124
Next page
Beveiliging instellen via de Embedded Web Server (EWS)
113
Beheerdersondersteuning
IPSec (Internet Protocol Security) ondersteunen
Het IP Security protocol zorgt voor verificatie en codering van communicatie in de netwerklaag waardoor alle toepassingen
en netwerkcommunicatie die via het IP-protocol lopen zijn beveiligd. IPSec kan worden ingesteld tussen de printer en
maximaal vijf hosts, waarbij zowel IPv4 als IPv6 worden gebruikt. U configureert als volgt het IPSec via de Embedded Web
Server:
1 Open uw Web browser. Typ op de adresregel het IP-adres van de printer die u wilt configureren met de volgende
indeling: http://ip_address/.
2 Klik op Configuratie.
3 Klik in Overige instellingen op Netwerk/poorten.
4 Klik op IPSec.
De volgende twee typen verificatie worden ondersteund voor IPSec:
Shared Key Authentication—Elke ASCII-woordgroep die wordt gebruikt door alle deelnemende hosts. Dit is de
eenvoudigste manier om te configureren wanneer slechts een paar hosts op het netwerk IPSec gebruiken.
Certificate Authentication—Zorgt ervoor dat elke host of subnet van hosts kan verifiëren voor IPSec. Voor elke
host moet er een openbare sleutel en een persoonlijke sleutel zijn. Certificaat van peer valideren is standaard
ingeschakeld, en vereist een getekend certificaat voor elke host en de installatie van het authority-certificaat. Elke
host moet een identifier hebben in de Naam van alternatief onderwerp van het getekende certificaat.
Opmerking: Nadat een apparaat is geconfigureerd voor IPSec met een host, zal IPSec nodig zijn voor elke vorm
van IP-communicatie.
Beveiligingsmodus gebruiken
U kunt de TCP- en UDP-poorten configureren naar een van de volgende drie modi:
UitgeschakeldStaat geen netwerkverbindingen toe met deze poort.
Beveiligd en Onbeveiligd—Zorgt ervoor dat de poort open blijft, zelfs in Beveiligingsmodus.
Alleen Onbeveiligd—Zorgt ervoor dat de poort alleen open gaat als de printer niet in de Beveiligingsmodus staat.
Opmerking: U dient een wachtwoord in te stellen om de Beveiligingsmodus in te schakelen. Zodra deze is
ingeschakeld, zullen alleen de poorten die ingesteld zijn op Beveiligd en Onbeveiligd open zijn.
De beveiligingsmodus configureren vanuit de Embedded Web Server voor TCP- en UDP-poorten:
1 Open uw Web browser. Typ op de adresregel het IP-adres van de printer die u wilt configureren met de volgende
indeling: http://ip_address/.
2 Klik op Configuratie.
3 Klik in Overige instellingen op Netwerk/poorten.
4 Klik op Toegang via TCP/IP Poort.
Opmerking: Door het uitschakelen van de poorten zal de functie op de printer worden uitgeschakeld.
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark W 840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark W 840 in the language / languages: Dutch as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info