Manual Lexmark PRO 202 (page 134 of 182) (English)

455567

134

Zoom out

Zoom in

1/182

• “Cannot run the fax software” on page 138

• “Fax error messages on the printer control panel” on page 138

For detailed descriptions of common terms and tasks, see the following:

• “Setting up the printer to fax” on page 68

• “Faxing FAQ” on page 85

Fax troubleshooting checklist

Before you troubleshoot, use the following checklist to solve most fax problems:

• Check the dial tone to make sure that the cable connections are correct and that the telephone line is working.

To check the dial tone:

1 Plug an analog telephone into the wall jack.

2 Listen for a dial tone through the telephone handset.

If you hear a dial tone, then the connections are correct and the line is working.

If you do not hear a dial tone, then check the other items on the checklist, and then listen for a dial tone after

checking each item.

• Make sure that the devices are set up correctly according to your setup scenario in the “Setting up the printer to

fax” section.

• Make sure that the cables are connected to the correct ports.

• Make sure that the cables are securely plugged in.

Check the cable connections for the following hardware, if applicable:

– Power supply

– Telephone

– Answering machine

– VoIP adapter

– DSL filter

– Splitter

– Cable modem

• If the printer is connected to a Digital Subscriber Line, install a DSL filter for the printer. A DSL filter minimizes

interference between the fax signals and Internet signals on the line. Connect the printer to the phone port on the

DSL filter, and connect the computer to the DSL/HPN port on the filter.

To make sure that you connected the printer to the filter correctly, plug an analog phone into the

port on the

back of the printer, and then listen for a dial tone.

• If the printer is connected to a VoIP line, then make sure that the printer is plugged into an active phone port. Plug

the printer into the first port on the VoIP adapter, most often labeled as Phone Port or Phone Line 1.

To make sure that the phone port is active, plug an analog phone into the port, and then listen for a dial tone.

• If you are using a splitter, then make sure that you are using a phone splitter. Do not use a line splitter. To make

sure that you are using the correct splitter, plug an analog phone into the splitter, and then listen for a dial tone.

• If you have checked the items on this list but still do not hear a dial tone, then contact your line provider.

Troubleshooting

134

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark PRO 202 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark PRO 202

Lexmark PRO 202 User Manual - German - 191 pages

Lexmark PRO 202 User Manual - Dutch - 187 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lexmark PRO 202 Manual

Product: