20486
105
Zoom out
Zoom in
Previous page
1/116
Next page
96
Error conditions
What shows on the four
indicator lights
Description Cause and solution
binary 12 (for 0.25 sec),
binary 3 (for 0.25 sec),
repeat continuously.
Serious failure.
The print server is unable
to recover.
Flawed firmware in print server or power interruption
during flash operation.
Call Customer Support.
binary 15 (for 0.25 sec),
binary x (for 0.25 sec),
repeat continuously.
where x could be 0, 1, 2, 3,
4, 5, 6, 7, 8, or 9
POST error Power-on self test error. During start-up, a hardware
failure was detected on the print server.
1 Reset the print server.
2 If the problem reoccurs, call Customer Support.
binary 9 (for 0.75 sec),
binary 1 (for 0.75 sec),
repeat continuously.
Serial error
Type = Parity
Parity error occurred during serial print job.
1 Reset the print server. (The 9,1 error code does
not go away until you reset the print server. This is
to make sure you see that a parity error occurred.
To turn parity checking off, use a utility or telnet to
port 9000.)
2 Send the job again.
binary 9 (for 0.75 sec),
binary 1 (for 0.75 sec),
repeats for a few seconds,
then the print server
automatically resets its
serial port (attempts to
recover). The two parallel
ports are unaffected.
Serial error
Type = Parity
Serial settings for print server do not match serial
settings for printer.
Change the serial port settings for either the print
server or the printer so they match.
The printer was turned off while the serial job was
printing.
1 Turn the printer back on. The print server then
flushes the current job.
2 Send the job again.
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark J110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark J110 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark J110

Lexmark J110 User Manual - Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info