612282

Lexmark Genesis S815 Manual

92
Zoom out
Zoom in
Previous page
1/197
Next page
Receiving faxes automatically
1 Make sure that Auto Answer is on:
a From the home screen, navigate to:
> Fax Setup > Ringing and Answering > Auto Answer
b If Auto Answer is not set to On, touch On, and then touch Accept.
2 Set the number of rings before the printer picks up incoming faxes:
a Touch Pick Up On.
b Set the number of rings, and then touch Accept to save the setting.
When the number of rings you set is detected, the printer automatically receives the incoming fax.
Warning—Potential Damage: Do not touch the cables or the
and ports while receiving a fax.
Tips:
• If the printer is sharing the line with other analog devices (telephone, answering machine), then set the printer
to pick up calls two rings after the answering machine. For example, if the answering machine picks up calls after
four rings, then set the printer to pick up after six rings. This way, the answering machine picks up calls first and
your voice calls are received. If the call is a fax, then the printer detects the fax signal on the line and takes over
the call. If the printer is on a dedicated fax line, then you may set the printer to pick up on any number of rings.
• If you have multiple numbers on a single line, or if you subscribe to a distinctive ring service provided by your
telephone company, then make sure that you set the correct ring pattern for the printer. Otherwise, the printer
will not receive faxes even if you have set it to receive faxes automatically.
Receiving faxes manually
1 Make sure that Auto Answer is off:
a From the home screen, navigate to:
> Fax Setup > Ringing and Answering > Auto Answer
b If Auto Answer is not set to Off, touch Off, and then touch Accept.
2 When the telephone rings and you hear fax tones when you pick up the handset, press on the printer or *9*
on the telephone attached to the printer.
Note: The default code for answering faxes manually is *9*, but for increased security, you can change it to a
number that only you know. You can enter up to 7 characters for your code. The valid characters are the digits
0–9 and the characters # and *.
Warning—Potential Damage: Do not touch the cables or the
and ports while actively receiving a fax.
Faxing FAQ
If I skipped the fax setup initially, do I need to run the installer again
to set up the printer to fax?
You do not need to run the installer again. You can set up and configure the printer to fax through the fax software
that was installed with the printer software.
Faxing
92
… 92 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark Genesis S815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark Genesis S815 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark Genesis S815

Lexmark Genesis S815 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info