20690
85
Zoom out
Zoom in
Previous page
1/143
Next page
85
30 <color> Toner Cart
Missing
The specified toner cartridge is either
missing or incorrectly installed.
Insert the toner cartridge completely into
the printer. The printer automatically
clears the message.
If the printer was just set up for the first
time, see “Step 5: Installing Supplies” in
the Setup Guide.
31 Defective <x>
Cartridge
A defective print cartridge is installed. Remove the specified print cartridge and
install a new one.
32 Unsupported
<color> Cartridge
An unsupported print cartridge is
installed.
Remove the specified print cartridge and
install a new one.
33 Calibration Error
<x>
The printer detects a calibration error
for a particular color.
•Press Go to continue printing.
Once printing is complete, press Menu
to access the Color Menu, and select
Color Adjust to recalibrate.
34 Incorrect Media
The printer has detected a mismatch in
the requested media type and the type
loaded in the multipurpose feeder or
any tray.
See Paper and specialty media
specifications on page 38 for more
information.
Replace the media in the multipurpose
feeder or tray with the requested media
and press Go.
•Press Menu to access the Busy/
Waiting Menu group, and select one of
the following options:
Cancel Job
Reset Printer
Reset Active Bin
Check Supply Levels
34 Short Paper
The printer has determined that the
length of the paper in the source
specified on the second line of the
display is too short to print the
formatted data. For auto-size sensing
trays, this error occurs if the paper
guides are not in the correct position.
•Press Go to clear the message and
continue printing. The printer does not
automatically reprint the page that
prompted the message.
Make sure the Paper Size setting in the
Paper Menu is correct for the size paper
you are using. If MP Feeder Size is set
to Universal, make sure your paper is
large enough for the formatted data.
•Press Menu to open the Job Menu and
cancel the current job.
See also: Paper and specialty media
specifications
35 Res Save Off
Deficient Memory
The printer lacks the memory needed
to enable Resource Save. This
message usually indicates too much
memory is allocated for one or more of
the printer link buffers.
•Press Go to disable Resource Save and
continue printing.
To enable Resource Save after you get
this message:
Make sure the link buffers are set to
Auto, and exit the menus to activate
the link buffer changes.
When Ready is displayed, enable
Resource Save from the Setup Menu.
Install additional memory.
36 Printer Service
Required
Background toner has prevented a
calibration cycle from completing. A
defective cartridge or ITU may be
installed. Contact a service
representative for a diagnosis.
Press Go to clear the error.
See also: Calling for service
Message What this message means What you can do
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C762 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C762 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C762

Lexmark C762 User Manual - Dutch - 218 pages

Lexmark C762 User Manual - Portuguese - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info