20690
41
Zoom out
Zoom in
Previous page
1/143
Next page
41
Transparencies
Check with the manufacturer or vendor to determine whether your transparencies are compatible with laser
printers that heat transparencies to 150°C (302°F). Use only transparencies that are able to withstand
these temperatures without melting, discoloring, offsetting, or releasing hazardous emissions. For detailed
information, refer to the Card Stock & Label Guide , which is available on the Lexmark Web ite at
www.lexmark.com.
Envelopes
Use envelopes that can withstand temperatures of 155°C (311°F) without sealing, excessive curling,
wrinkling, or releasing hazardous emissions. If you have any doubts about the envelopes you are
considering using, check with the envelope supplier.
Labels
Your printer can print on many labels designed for use with laser printers. These labels are supplied in
letter size, A4 size, and legal size sheets. Label adhesives, face sheet (printable stock), and topcoats must
be able to withstand temperatures of 155°C (311°F).
Avoiding paper jams
The following hints can help you avoid paper jams:
Do not remove paper trays while a job is printing. Wait for a Load Tray <x> or Ready message
before you remove the tray.
Use only recommended paper.
Do not load wrinkled, creased, or damp paper.
Flex, fan, and straighten paper before you load it.
Do not overload the trays or the multipurpose feeder. Make sure the stack height does not exceed
the maximum height indicated.
Push all trays firmly into the printer after loading them.
Make sure the guides in the trays are properly positioned for the size paper you have loaded.
Do not send jobs to staple, hole punch, or offset for transparencies, labels, or card stock.
We recommend that transparencies, labels, card stock, and envelopes not be sent to the optional
mailbox or optional finisher. These specialty media types should be sent to the standard bin.
If an optional finisher or mailbox is attached to your printer, make sure the printer and option are
correctly aligned. Refer to the Setup Guide that came with your printer or option for alignment
instructions.
Make sure all cables that connect the high capacity feeder or finisher to the printer are correctly
attached. Refer to the Setup Guide for more information.
If a jam should occur, clear the entire paper path.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C762 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C762 in the language / languages: English as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C762

Lexmark C762 User Manual - Dutch - 218 pages

Lexmark C762 User Manual - Portuguese - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info