20464
39
Zoom out
Zoom in
Previous page
1/145
Next page
Media guidelines
39
Media specifications
Labels
The printer can print on paper labels designed for use with laser printers. Only letter size, A4 size, and legal size label
sheets should be used. Label adhesives, face sheet (printable stock), and topcoats must be able to withstand temperatures
of 180°C (356°F) and pressure of 30 pounds per square inch (psi). Do not use vinyl labels.
Try a sample of any labels considered for use with the printer before purchasing a large quantity.
For detailed information on label printing, characteristics and design, see the Card Stock & Label Guide available on the
Lexmark Web site at www.lexmark.com/publications.
When printing on labels:
Set the Paper Type menu item to Labels in the Paper Menu. Set the Paper Type from the printer operator
panel, the printer driver, or from MarkVision Professional.
Do not load labels together with paper or transparencies in the same source; mixing media can cause feeding
problems.
Do not use label sheets with a slick backing material.
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets
also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties.
Use labels that can withstand temperatures of 180°C (356°F) without sealing, excessive curling, wrinkling, or
releasing hazardous emissions.
Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die-cuts of the label.
Do not use label sheets that have adhesive to the edge of the sheet. Zone coating of the adhesive at least 1 mm
(0.04 in.) away from edges is recommended. Adhesive material contaminates the printer and could void the
warranty.
If zone coating of the adhesive is not possible, remove a 3 mm (0.125 in.) strip on the leading and driver edge, and
use a non-oozing adhesive.
Portrait orientation is preferred, especially when printing bar codes.
Do not use labels that have exposed adhesive.
For detailed information on label printing, characteristics, and design, see the Card Stock & Label Guide, available on the
Lexmark Web site at www.lexmark.com/publications.
Card stock
Card stock is single ply, and has a large array of properties, such as the moisture content, thickness, and texture, that can
significantly affect print quality. See Identifying media sources and specifications for information on the preferred weight
for the grain direction of media.
Try a sample of any card stock considered for use with the printer before purchasing a large quantity.
See Media types and weights for information on the preferred weight of media.
When printing on card stock:
Set the Paper Type menu item in the Paper Menu to Card Stock from the operator panel, from the printer driver,
or from MarkVision Professional. Set the Paper Weight to Card Stock Weight, and select the Card Stock
Weight as Normal or Heavy for the value. Set this from the operator panel, the printer driver, or from MarkVision
Professional. Use Heavy for card stock heavier than 163 g/m
2
(90 lb Index Bristol).
Be aware that preprinting, perforation, and creasing can significantly affect the print quality and cause media
handling or jamming problems.
Avoid using card stock that may release hazardous emissions when heated.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C522 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C522 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C522

Lexmark C522 User Manual - Dutch - 35 pages

Lexmark C522 User Manual - Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info