20464
29
Zoom out
Zoom in
Previous page
1/145
Next page
Printing the Print Quality Test Pages
29
Printing
6 When the needed item is selected, press .
The message Printing PCL Fonts. or Printing PS Fonts. appears while the pages print based on the one
selected. The printer returns to the Ready message after the font sample pages print.
If any other message appears when this page prints, see the Menus and Messages Guide located on the publications CD
for more information.
Printing the Print Quality Test Pages
To help isolate print quality problems, print the Print Quality Test Pages.
1 Turn the printer off.
2 Press and hold and while turning the printer on.
3 Release the buttons when the clock appears.
CONFIG MENU appears on the first line of the display.
4 Press until Prt Quality Pgs appears, and then press .
The pages are formatted. The Printing Quality Test Pages message appears, then the pages print. The
message remains on the operator panel until all the pages print.
The Print Quality Test Pages contain several pages. The first page which is printed in English text only contains a
mixture of text and graphics. The information includes values of the Quality Menu settings in Settings, and
printer and toner cartridge configuration information. The remaining pages only contain graphics.
After the Print Quality Test Pages print, exit the CONFIG MENU.
5 Press until Exit Config Menu appears, and then press .
6 The message Resetting the Printer and the clock appear, and the printer returns to Ready.
Printing only black text and graphics
If planning to print for an extended period with black toner only, complete Configuring the printer for black-only printing
which follows and Removing the color supplies. This saves the matching toner cartridges (cyan, magenta, and yellow)
and photoconductor units from excessive wear.
Note: Store the photoconductor units in a clean, cool, dark, and dry place where they will not be touched or
scratched. Store the toner cartridges with the photoconductor units. Keep the photoconductor units
and toner cartridges readily available.
Configuring the printer for black-only printing
Complete the following instructions to print with black only prior to removing all the color supplies from the printer.
1 Turn the printer off.
2 Press and hold and while turning the printer on.
3 Release the buttons when the clock appears.
CONFIG MENU appears on the first line of the display.
4 Press until Black Only Mode appears, and then press .
5 Press until On appears, and then press .
The Submitting Selection message appears.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C522 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C522 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C522

Lexmark C522 User Manual - Dutch - 35 pages

Lexmark C522 User Manual - Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info