20466
98
Zoom out
Zoom in
Previous page
1/145
Next page
Solving media feed problems
98
Troubleshooting
Solving media feed problems
Symptom Cause Solution
Paper frequently jams. Media that does not meet the
printer specifications is being used.
Use recommended media.
See the Card Stock & Label Guide available on our
Lexmark Web site at www.lexmark.com for detailed
specifications.
See Clearing jams for more information.
See Avoiding jams hints for information that can help
prevent jams from occurring.
Too much paper or too many
envelopes are loaded.
Make sure the stack of media loaded does not exceed
the maximum stack height indicated by the load line on
the tray or the stack height limiter on the multipurpose
feeder.
Guides in the selected tray are not
set to the appropriate position for
the size paper loaded.
Move the guides in the tray to the correct position.
See Loading the standard tray and Loading the
optional 500-sheet tray for detailed instructions.
The paper has absorbed moisture
due to high humidity.
Load paper from a fresh package.
Store paper in its original wrapper until it is loaded.
See Storing media for more information.
Some printer models do not have a
standard bin full sensor.
Remove media from the standard bin.
The standard bin media stop is not
set to the correct position for the
media size.
Set the media stop in the standard bin to the correct
position. See Using the media stop for more
information.
The multipurpose feeder door is
designed to tilt down to prevent
damage to it when the lower door is
opened. This is a protective feature
of the printer.
To reposition the multipurpose feeder door:
1 Remove media from the multipurpose feeder.
2 Push the extensions back into place.
3 Close the multipurpose feeder.
4 Open the multipurpose feeder.
5 Grasp the multipurpose feeder extension, and pull it
straight out until fully extended.
6 Load media into the multipurpose feeder.
The fuser may be installed
incorrectly.
CAUTION: The fuser and the inside
of the printer near the fuser may be
hot. Wait for the fuser to cool before
attempting to solve this problem.
1 Turn the printer off.
2 Open the upper door.
3 Push down on the fuser handles while tightening
each fuser thumbscrew.
4 Close the upper door completely.
5 Open the upper door completely.
6 Re-tighten each fuser thumbscrew completely.
7 Close the upper door completely.
8 Turn the printer on.
The fuser may be damaged. Replace the fuser.
The Paper Jam
message remains after
the jam is removed.
The entire media path is not
cleared, or the door specified by the
message has not been opened to
check for jams in this area.
Clear media from the entire path, open the door
indicated by the operator panel message, clear the
jam, and close the door. The printer resumes printing.
See Identifying the media path for more information.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lexmark C520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lexmark C520 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lexmark C520

Lexmark C520 User Manual - Dutch - 35 pages

Lexmark C520 User Manual - Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info