Introduction
Thank you for purchasing the DMP103Series digital multimedia player. Listen to your favourite music les
(MP3 and WMA les), record voice messages (WAV les), watch videos (SMV les) and pictures (JPG and
BMP les). You can store data on the unit’s 1GB ash memory. The unit can also support an SD card of up
to 2GB. Please read this user guide in full to discover all the functions this product has to offer.
WARNING: Do not put heavy objects on the device. Do not expose the device to water or any other
liquids. Avoid extreme temperatures, moisture and magnetic source.
Product description
Image A
1. VOL+/Up key
2. Next/Fast forward key
3. On/Off/Play/Pause/Stop key
4. MODE key
5. Previous/Fast backward key
6. VOL-/Down key
7. Record/A-B repeat/Delete key
Image B
1 - Battery slot
2 - Insert and eject
3 - SD card slot
Image C
4 - Earphone socket
5 - Microphone
6 – USB
Unpacking the device
When unpacking, ensure that the following elements are included:
1 DMP103Series digital multimedia player
1 earphone
1 USB cable
1 CD-Rom
1 instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of this
player and should be discarded.
The DMP103Series player operates with 1 x AAA/LR03 1.5V type battery (not included).
1. Open the battery compartment cover located at the back of the unit.
2. Insert 1 x AAA/LR03 1.5V type battery (not included) into the battery compartment observing the correct
polarity (image B, p.2).
3. Replace the battery cover.
Note: The battery indicator is located on the upper right corner of the LCD screen:
• : The battery capacity is full.
• : The battery capacity is low. Recharge or replace the battery.
Battery installation
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the product
before being charged. Rechargeable batteries are only to be charged under adult supervision. Different types of
batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as recommended
are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the toy.
The supply terminals are not to be short circuited. Do not throw batteries into a re. Remove the batteries if you are not
going to use the unit for a long period of time.