666654

Levita BD-4603 ALS Manual

22
Zoom out
Zoom in
Previous page
1/76
Next page
22
BD-4603 ALB/ALS
11 Applying the cuff
12 Taking measurement
• When the batteries are installed.
• Press the start/stop button to start measurement. After all segments are displayed, the cuff will
inflate to a level that is right for you.
• If the cuff doesn’t stop inflating, remove the cuff immediately. To stop the measurement, press
start/stop button. The cuff will deflate right after.
• After the initial inflation of the cuff, the pressure will slowly decrease and when a pulse is
detected, the heart rate symbol will start flashing.
• When the measurement is finished, the systolic pressure, diastolic pressure, heart rate and
WHO indicator will be displayed and saved.
• Press the start/stop button to power off otherwise the monitor will automatically turn off after 1
minute if no button is pressed.
13 Recall the records
After each measurement, the systolic and diastolic pressure, heart rate with the time and date will be
automatically stored.
1. Remove all watches, jewellery, etc. prior to
attaching the Arm cuff.
2. Press your brachial artery by two fingers
approximately 2,5 cm above the elbow on the
inside of your left arm to determine where your
strongest pulse is.
3. Slide the end of arm cuff furthest from the tube
through the metal ring to a loop. The smooth
cloth should be on the inside of the cuff. The
Velcro will be on the outside of the cuff.
4. Put the left arm through the cuff loop. The
bottom of the cuff should be approx. 1,5 cm
above the elbow. The cuff should lie over the
brachial artery on the inside of the arm.
5. Pull the cuff so that the top and bottom edges
are tightened around your arm.
6. When the cuff is positioned properly, press the
Velcro firmly against the pile side of the cuff.
The metal ring will not touch your skin.
7. Relax your entire body, especially the area
between your elbow and fingers. Place your
elbow on a table so that the cuff is at the same
level as your heart. Avoid leaning back while
the measurement is being taken.
FP
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Levita BD-4603 ALS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Levita BD-4603 ALS in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 10,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info