765509
4
Zoom out
Zoom in
Previous page
1/17
Next page
4
3. Place the air conditioning unit in a dry place with a flat floor, keeping a minimum
distance of 50 cm above the unit and from surrounding objects and walls.
4. After installation, make sure the power cable plug is not damaged and is firmly inserted
into the electrical outlet. Route the power supply cable to avoid tripping over the cable
and pulling the plug out of the socket.
5. Do not place any objects into the inlet and outlet air openings of the air conditioning
unit. Do not cover the inlet and outlet vents and leave them unobstructed.
6. When installing drain hoses, make sure they are properly connected and that they are
not deformed or bent sharply.
7. When installing the upper and lower air flow directing louvres, carefully insert them
manually to avoid damage.
8. When moving, be sure the air conditioning unit is in the vertical position.
9. The air conditioning unit should be located at a safe distance from flammable
substances such as petrol or flammable gases and stoves or other heat sources.
10. Never remove, repair or modify the air-conditioning unit alone, otherwise damage to
the air-conditioning unit, property damage or personal injuries may occur. In case of a
failure of the air-conditioning unit, have it repaired by the manufacturer or by an
authorised service centre to avoid possible hazards.
11. Do not place or use the air conditioning unit in bathrooms or other wet areas.
12. Do not switch off the air conditioning unit by disconnecting the power cable from the
socket.
13. Do not place beverage containers or other objects on the air conditioning unit to avoid
penetration of spilled liquids into the unit.
14. Do not use any sprays or other flammable substances near the air conditioning unit.
15. Do not wipe or wash the air conditioning unit with chemical solvents, such as gasoline or
alcohol. If it is necessary to clean the air conditioning unit, disconnect it from the power
supply and clean it with a damp soft cloth. In case of larger contamination of the air
conditioning unit, clean it with a mild cleaning agent.
16. If the power supply cable is damaged, it must be replaced by the manufacturer, an
authorised service centre or a similarly qualified person to avoid the risk of injury.
17. The equipment installation must be carried out in accordance with the local regulations
for the electrical connection.
18. Do not operate the air conditioning unit in wet areas, e.g. in bathrooms or laundry
rooms.
Transport, marking and storage of the air conditioning unit
1. Transport of equipment containing flammable refrigerants:
These handling operations must be carried out in compliance with the transport regulations.
2. Marking of equipment with signs for using:
According to the local regulations.
3. Disposal of the equipment containing a flammable coolant:
In compliance with the national regulations.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Levita AC 12000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Levita AC 12000 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info