Manual Leventi Bakermat MasterMind 2008 (page 24 of 34) (English)

652031

Zoom out

Zoom in

1/34

Maintenance and cleaning

Time saving: when you clean the oven on a regular and

daily basis, then it will never get too dirty and the cleaning

process can be done in a jiffy.

9.2.7 Manually descaling the oven chamber

This chapter is mainly of use when you have an oven that

is equipped with a direct injection system. With these

ovens there may be a calcium residue (white) on your

oven chamber depending on the degree of your water.

This can be removed as follows:

Clean the oven as described in this manual.

Let the oven cool down to maximally 60° Celcius

Let the oven steam for 15 minutes at 60° Celcius

Then spray the oven chamber abundantly with Leventi

Ontkalker (decalcifier) and leave this for about 20

minutes to work.

TAKE CARE: ensure that you do not spray the door

sealing with de-scaler! This greatly prolongs the life of the

door sealing.

Then let the oven steam for 30 minutes at 100° Celcius

Clean the oven after the cleaning program by using a

handshower and or a moist cloth in order not to leave any

chemical residue behind. Also clean the door rubber!

9.3 Maintenance of the boiler

This chapter is only applicable when your oven has been

equipped with a boiler.

Flushing the boiler

The boiler will be automatically flushed when the oven is

turned on. The computer will decide itself if this is

necessary. The flushing cycle will only take a couple of

minutes. When the oven is too hot then it needs to cool

(the boiler) down first.

9.3.1 Decalcifying the boiler

Depending on the use and the degree of your water the

boiler needs to be decalcified. On average this needs to

be done once every two weeks (with a maximal water

degree of 3°dh). The oven will indicate when this needs to

be done.

The Mastermind will show the message that the boiler

needs to be decalcified.

The Digital showa the code B1

You decide when you want to decalcify the boiler

(preferably at the end of the working day in respect to the

time this process takes). But you should decalcify as soon

as possible.

Also applicable here: when you regularly decalcify your

oven then this will never happen as a surprise during

busy opening hours.

Starting up decalsifying of the boiler

With the Mastermind:

choose menu / cleaning / decalcify boiler

With the Digital:

Press simultaneously both and

as indicated in the figure for 3 seconds

The oven will start up the decacifying programme.

The boiler will be flushed after a cooling down period.

The masterfy will notify this, the Digital shows the code

B1-4.

Then follow the instructions in the display. The oven will

ask you to insert the decalcifier in the boiler.

The Digital shows the code B2-4.

Poor the indicated amount of Leventi Ontkalker in the

opening on the right hand side of the oven. Use a funnel

to poor in the decalcifier.

Then press continue.

The Mastermind notifies that the process is running, the

Digital will show the code B3-4.

The decalcifying process takes approximately eight

hours. It is recommended to plan this in at the end of the

Hey,
My oven stoped heating. I don't know why, it's working just it does't heat up. What are the possible reasons and how can i fix it? Submitted on 26-12-2022 at 04:35
Reply Report abuse
Is heating elements for oven older than 2005? thanks, Submitted on 28-10-2021 at 13:55
Reply Report abuse
Is heating element available for Leventi oven older than 2005?
Thanks!
lee Submitted on 28-10-2021 at 13:52
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Leventi Bakermat MasterMind 2008 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Leventi Bakermat MasterMind 2008 Manual

Product: