729395
37
Zoom out
Zoom in
Previous page
1/124
Next page
MAC Clone Some ISPs limit Internet connections to a specified MAC
address. This setting allows you to manually change the MAC address
of the Wireless Router's WAN interface to match the PC's MAC address
provided to your ISP for registration. You can enter the registered MAC
address manually by typing it in the boxes provided. Otherwise,
connect only the PC with the registered MAC address to the Wireless
Router, then click the ―Clone your PCs MAC Address (Default: Disable)
STEP 3 - WAN
SETTINGS - PPPOE
Enable the Wireless Router IP address to be assigned automatically from
an Internet service provider (ISP) through a DSL modem using Point-to-
Point Protocol over Ethernet (PPPoE).
Figure 17:
Wizard Step 3 - WAN Settings - PPPoE
The following items are displayed on this page:
User Name Sets the PPPoE user name for the WAN port.
(Default: pppoe_user; Range: 1~32 characters)
Password Sets a PPPoE password for the WAN port.
(Default: pppoe_password; Range: 1~32 characters)
Verify Password Prompts you to re-enter your chosen password.
Operation Mode Enables and configures the keep alive time and
configures the on-demand idle time.
MAC Clone Some ISPs limit Internet connections to a specified MAC
address of one PC. This setting allows you to manually change the MAC
address of the Wireless Router's WAN interface to match the PC's MAC
address provided to your ISP for registration. You can enter the
registered MAC address manually by typing it in the boxes provided.
Otherwise, connect only the PC with the registered MAC address to the
37
C
HAPTER
4 | Initial Configuration
Setup Wizard
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-6005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-6005 in the language / languages: English as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info