729394
63
Zoom out
Zoom in
Previous page
1/81
Next page
63
Routing
When you have more than one WBR-6004 or routers with different subnets on the network, you will
need to enable this function to allow the different subnets to communicate with each other.
There are two types of routing supported by the WBR-6004.
Dynamic Routing: This method uses Routing Information Protocol (RIP) to enable the
devices to determine the best route for each packet based on the number of hops between the
source and destination.
Tick the Enable box to enable Dynamic Routing. Use RIPv2 only if you have different subnets
in your network. Otherwise, please select RIPv1 if you need this protocol.
Static Routing: Allows computers that are connected to the WBR-6004 to communicate with
computers on other LAN segments which are connected to the WBR-6004 using a different
router. You can specify up to eight routing rules.
The details below are required to set the routing rules:
IP Address
Subnet Mask
Gateway
Hop, number of hops
Tick Enable for each rule.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-6004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-6004 in the language / languages: English as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info