729392
82
Zoom out
Zoom in
Previous page
1/86
Next page
2. Why can I not connect the router even if the cable is plugged in LAN port and the led is light?
A: First, please check Status Led. If the device is normal, the led will blink per second.
If not, please check the blinking Status led shows.
There are many abnormal symptoms as below:
Status Led is bright or dark in work: The system hanged up .Suggest powering off and on the
router. But this symptom often occurs, please reset to default or upgrade latest fw to try again.
Status led flashes irregularly: Maybe the root cause is Flash ROM and please press reset Button to
reset to default or try to use Recovery mode. (Refer to Q3 and Q4)
Status flashes very fast while powering on: Maybe the router is the recovery mode and please
refer to Q4.
3. How to reset to factory default?
A: There are 2 methods to reset to default.
Method 1) Restore with RESET button
First, turn off the router and press the RESET button in. And then, power on the router and push the
RESET button down until the Status start flashing, then remove the finger. If LED flashes about 8
times, the RESTORE process is completed. However, if LED flashes 2 times, repeat steps and try
again.
Method 2) Restore directly when the router power on
First, push the RESET button about 5 seconds (Status will start flashing about 5 times), remove the
finger. The RESTORE process is completed.
4. Why can I not connect Internet even though the cables are plugged in WAN port and LAN
port and the LEDs are blink? In addition, Status led is also normal and I can configure web
management?
A: Make sure that the network cable from DSL or Cable modem is plugged in Wan port of Router and
that the network cable from LAN port of router is plugged in Ethernet adapter. Then, please check
which wan type you use. If you are not sure, please call the ISP. Then please go to this page to input
the information of ISP is assigned.
74
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-6001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-6001 in the language / languages: English as an attachment in your email.

The manual is 5,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info