729390
59
Zoom out
Zoom in
Previous page
1/105
Next page
59
Internet (VC1)
Connection Method
Displays the current connection method, as set in the Setup
Wizard.
Connection Status
This indicates the current status of the Internet Connection
Active - Connection exists
Idle - No current connection, but no error has been
detected. This condition normally arises when an idle
connection is automatically terminated.
Failed - The connection was terminated abnormally.
This could be caused by Modem failure, or the loss of
the connection to the ISP's server.
If there is an error, you can click the "Connection Details"
button to find out more information.
Internet IP Address
This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
WAN MAC Address
It displays the MAC address for the WAN.
Connection Details
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the
type of connection, a "log" may also be available.
LAN
IP Address
The IP Address of the WBR-3600 Router.
Network Mask
The Network Mask (Subnet Mask) for the IP Address
above.
DHCP Server
This shows the status of the DHCP Server function. The
value will be "Enabled" or "Disabled".
MAC Address
This shows the MAC Address for the WBR-3600 Router, as
seen on the LAN interface.
Wireless
Name (SSID)
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
Region
The current region, as set on the Wireless screen.
Channel
This shows the Channel currently used, as set on the Wire-
less screen.
Wireless AP
This indicates whether or not the Wireless Access Point
feature is enabled.
Broadcast Name
This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
System
Device Name
The current name of the Router. This name is also the
"hostname" for users with an "@Home" type connection.
Firmware Version
The version of the current firmware installed.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-3600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-3600 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info