729388
108
Zoom out
Zoom in
Previous page
1/129
Next page
Chapter 8
Modem Mode
This Chapter explains configuration and operation when in "Modem" or
"Bridge" mode..
Overview
There are two modes available on the Mode screen.
Router - Both the ADSL Modem and the Router features are operational. In this
mode, this device can provide shared Internet Access to all your LAN users. Also,
by default, it acts a DHCP Server, providing an IP address and related information
to all Wireless and LAN users.
Modem - Only the ADSL Modem component is operational. All Router features are
disabled. This device is "transparent" - it does not perform any operations or make
any changes to the network traffic passing through it. You need to have a DHCP
Server on your LAN to provide IP addresses to the Wireless clients using this
Access Point.
This Chapter describes operation while in Modem Mode, also called Bridge Mode.
Management Connections
When this device restarts in Modem mode, the IP address does not change, but the
DHCP server is disabled. However, your PC will usually retain the IP address provided
by the DHCP Server, so the connection will be automatically re-established. You then
need to ensure that the IP address of this modem is suitable for your LAN.
You need to have a DHCP Server on your LAN to provide IP addresses to the
Wireless clients using this Access Point.
This Modem/AP must be a valid device on your LAN, to allow management con-
nections. You must assign a (fixed) IP address which is within the address range
used on your LAN, but not within the address range used by your DHCP server.
When you connect in future, just connect normally, using the IP address you assigned.
1. Start your WEB browser.
2. In the Address box, enter "HTTP://" and the current IP Address of the Wireless
ADSL Modem, as in this example, which uses the Wireless ADSL Modem's default
IP Address:
HTTP://192.168.0.1
3. When prompted for the User name and Password, enter admin for the user name,
and the current password, as set on the password screen. (The password is the
same regardless of the mode.)
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-3460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-3460 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info