729388
82
Zoom out
Zoom in
Previous page
1/129
Next page
Wireless ADSL2/2+ Modem Router User Guide
82
Local LAN
Local LAN
This identifies which PCs on your LAN are covered by this
policy. For each selection, data must be provided as follows:
Single address
Enter an IP address in the "IP address" field. Typically,
this setting is used when you wish to make a single Serv-
er on your LAN available to remote users.
Subnet address
Enter an IP address in the "IP address" field, and the de-
sired network mask in the "Subnet Mask" field.
The remote VPN endpoint must have these IP addresses
entered as its "Remote" addresses.
Remote LAN
Remote LAN
This identifies which PCs on the remote LAN are covered by
this policy. For each selection, data must be provided as
follows:
Single PC - no subnet
Select this option if there is no LAN (only a single PC) at
the remote endpoint. If this option is selected, no addi-
tional data is required.
Single address
Enter an IP address in the "IP address" field. This must
be an address on the remote LAN. Typically, this setting
is used when you wish to access a server on the remote
LAN.
Subnet address
Enter an IP address in the "IP address" field, and the de-
sired network mask in the "Subnet Mask" field.
The remote VPN endpoint must have these IP addresses
entered as its "Local" addresses.
IKE
Direction
This setting is used when determining if the IKE policy
matches the current traffic. Select the desired option.
Responder only - Incoming connections are allowed, but
outgoing connections will be blocked.
Initiator and Responder - Both incoming and outgoing
connections are allowed.
Exchange Mode
IPSec has 2 possibilities - "Main Mode" and "Aggressive
Mode".
Currently, only "Main Mode" is supported. Ensure the remote
VPN endpoint is set to use "Main Mode".
Diffie-Hellman
(DH) Group
The Diffie-Hellman algorithm is used when exchanging keys.
The DH Group setting determines the number of bit size used
in the exchange. This value must match the value used on
the remote VPN Gateway.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LevelOne WBR-3460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LevelOne WBR-3460 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info