If you can't connect
If the Wireless ADSL2/2+ Modem Router does not respond, check the
following:
The Wireless ADSL2/2+ Modem Router is properly installed, LAN
connection is OK, and it is powered ON. You can test the connection by
using the "Ping" command:
Open the MS-DOS window or command prompt window.
Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or
your PC's IP address is not compatible with the Wireless ADSL2/2+
Modem Router's IP Address. (See next item.)
If your PC is using a fixed IP Address, its IP Address must be within the
range 192.168.0.2 to 192.168.0.254 to be compatible with the Wireless
ADSL2/2+ Modem Router's default IP Address of 192.168.0.1. Also, the
Network Mask must be set to 255.255.255.0. See Chapter 4 - PC Confi-
guration for details on checking your PC's TCP/IP settings.
Ensure that your PC and the Wireless ADSL2/2+ Modem Router are on
the same network segment. (If you don't have a router, this must be the
case.)
Ensure you are using the wired LAN interface. The Wireless interface
can only be used if its configuration matches your PC's wireless set-
tings.
1. Click the Setup Wizard link on the main menu
2. On the first screen, select VC 1 (Router - Primary Internet Connection), then click